Voltage regulator Volter - 5,5птм

PTM-5.5 - a single-phase voltage regulator for an apartment or house a maximum power of 5.5 kW, belongs to a new series of Volter PTM is designed to provide a constant voltage of all kinds of electrical load from mains to poor voltage quality. This double conversion apparatus without accumulation of energy.
stabilizer provides no influence on the output voltage changes as the input voltage and surges and load changes. For this purpose it comprises a voltage source model with the mains frequency and a stable value which continuously compares the output voltage of the stabilizer. Due to this construction of the stabilizer, it does not react even at very sharp, almost instantaneous changes in the input voltage, and very quick to respond to any change in load. As implemented independently of the type of load, i.e. the stabilizer works equally active, capacitive and inductive load if the output current does not exceed its permissible output current.

To avoid overheating and thermal tripping under severe operating conditions ( full load, a high ambient temperature) voltage regulator equipped with a forced cooling system, which is triggered by increasing the temperature in the device for more than 60 ° C. To eliminate the noise, there are two fan running at low speed.

electronic type stepless
Phase one phase
Cutout with increasing input voltage. 330 In
Cutout in the "transit" 260 ± 5
Maximum Input Current 25 A
input voltage range 130-320 In
Nominal O. 220 V
O deviation. of nominal voltage + 0,5-0,5%
Max. 5.5 kW
O output. power at the lower value of 3.2 kW Uin
O. Power at the upper level Uin 3.0 kW Cooling forced

method hinged mounting / outdoor
Dimensions 350 x 420 x 160 mm (height x width x depth)
Weight 14,4kg
protection class IP20
Operating temperature range of + 1 ... + 40 ° C
Operating humidity range 40 ... 80%
Work atmospheric pressure range of 630 ... 800 mm. Hg
Color light gray
Warranty 60 months.