Quantity
|
Out of stock
|
||
|
Installation start - charging UPZS12 / 24 - 400/40 is designed to facilitate starting automobile engine in cold seasons and under rarefied or partially lost their capacity of batteries and charging starter batteries 12V or 24V stabilized current to 40A. Installation is designed as a mobile design that provides ease of use in fleets companies.
Specifications:
installation is supplying power to the onboard network of a vehicle in the start mode (12 or 24 volts) with voltage stabilization at the appropriate level, and setting provides charge of starter batteries in current stabilization mode with manual selection mode voltage (12 or 24 volts).
The device provides protection against connection to the power network or to a battery in reverse polarity, as well as provides protection against excessive starting current.
< br /> Mains-phase - 50 Hz, 380 ± 10%
power consumption not more than -12 kW
dimensions, not more -900h550h410 mm
Weight,... 80 kg
stabilized level trigger voltage 12V or 24V
maximum allowable starting current of -400A
mode re -... short cycle for at least 2 minutes. at a time of no more than 10 seconds
voltage rechargeable battery 12V or 24V
control range of charging current -0 -... 40A
The unit is designed for operation in ventilated premises with climate control in the absence of rainfall, direct sunlight at temperatures from -10 to + 35 ° C and relative humidity of 80% at a temperature of +25 ° C.
The warranty period for this device is 12 months.