Quantity
|
Out of stock
|
||
|
Automatic Bilge Pump maximum capacity 33 liters / minute. It is used to pump bilge, and bilge water. Has a built-in float switch (no mercury!). Automatically turns on admission of water (the float switch when afloat). It can also be turned ON by the shipowner. Equipped with a handle that allows to test operation of the circuit breaker, without dismantling the pump and arranging "training of flooding." power cable 90 cm in length can accommodate the connection place (soldering place, twist wires) at a distance from the area potentially at risk of flooding, which increases the reliability of the pump. Pump attached with screws through the filter grille. The upper part of the pumps can be easily removed for cleaning with a lattice
Specifications:
Performance * L / min:
- at zero pressure - 33
- at a head of 1. m - 23
- at a head of 2 meters - 13
Productivity - 500 gallons / hour
maximum pressure, m - 2.7
Rated voltage: 12 V
current Rating - 1.5 A
Height: 102 mm
length: 140 mm
outlet diameter - 19 mm (3/4 inch)
Manufacturer - «Attwood», USA
* Performance and maximum pressure specified for the voltage at the 113.3% higher than the nominal, ie. e. for about stress Normally the available system voltage with the engine running.