Charge Controllers Xantrex C60

Hantrex C60 (12/24 VDC) for use as a charge controller of solar panels. C-Series controller can control the panels 12, 24 volt DC. All controllers have a setup for charging nickel-cadmium, lead-acid, gel or absorption-glass batteries.
Controllers C Series display are off at low voltage, and automatic shut-off adjustment at low and high voltage. There is a manual disconnection in emergency operation with low voltage
Technical features
• regulation method:. A transistor, a three-stage (bulk, absorption and alignment), pulse width modulation (PWM)
• Controls: two adjustable voltage point for the user for load control or charging source - adjustment saved if the power battery
• Optionally: LCD backlight display CM, SM / R-50 or CM / R-100: battery voltage, the number of ampere DC , the total number of ampere-hours, and ampere-hours since the last reset;
battery temperature sensor BTS / 15 or BTS / 35 - temperature sensor to improve the accuracy of charging. 15 feet (4.5 m) or 35 feet (11 m) cable with standard telephone type connectors (RG).
• Smoothing charging
• Automatic correction

Voltage 12 and 24 VDC
Max. PV voltage with open chain 55 VDC
charging current / load (© 25 ° C 60 A DC
Max. Peak current 85 A
Max. Voltage drop across controller 0.30 In
Typical current consumption without load 3mA
consumption during operation 15 mA (type.)
Recommended current breaker 60 A
Recommended wire section 8 AWG
Plants for lead-acid batteries adjustable load control

Connection mode at low voltage - adjustable on all models
Turn off at low voltage - manual or automatic, adjustable delay of tripping
Physical data: < br /> the recommended temperature range is 32 to 104 F (from 0 to +40 C)
Permissible temperature range from -67 to 167 F (-55 to +75 C)
limit height (operating ) of 15,000 feet (5000 meters)
limit height (in oFF state) 50,000 feet (16,000 meters)
Dimensions (H x W x T) 10 "x 5" x 2.5 "(25.4 cm x 12.7 cm x 6.35 cm)
Weight (Controller only) 1.4 kg
Setting:
Indoors, ventilated, powder coated steel, 3/4 "and 1"
Mounting Vertical mounting