Charge Controllers Xantrex C40

Controller charge Hantrex C40.
intended for use as a charge controller of solar panels. C series can control panel 12, 24 and 48 volts DC. All controllers have a setup for charging nickel-cadmium, lead-acid, gel or absorption-glass batteries.
Controllers C Series display are off at low voltage, and automatic shut-off adjustment at low and high voltage. There is a manual shutdown in emergency operation with low voltage. Technical features
• regulation method: a transistor, a three-stage (bulk, absorption and alignment), pulse width modulation (PWM)
• Controls: two adjustable voltage point for the user for load control or charging source - adjustment retained when the battery is disconnected
• Optionally: LCD backlight display CM, SM / R-50 or CM / R-100: battery voltage, the number of ampere DC, the total number of ampere-hours, and ampere-hours after the last discharge temperature sensor
Battery BTS - a temperature sensor for enhancing the accuracy of charging. 15 feet (4.5 m) or 35 feet (11 m) cable with standard telephone type connectors (RG).
• Smoothing charging
• Automatic correction

Voltage 12 24 and 48 VDC
Max. PV voltage with open chain 125 VDC
charging current / load (© 25 C °) 40 A DC

Max. 85 A peak current value
Max. voltage drop across the controller
0.30 In typical current consumption without load 3mA
consumption during operation 15 mA (type.)
Recommended current breaker 50 A
Recommended wire section 8 AWG
settings for lead-acid batteries adjustable load control

Connection mode at low voltage - adjustable on all models
Turn off at low voltage - manual or automatic, adjustable tripping delay of < br /> The physical data:
Recommended RANGES temperatures of 32 to 104 F (from 0 to +40 C)
Permissible temperature range from -67 to 167 F (-55 to +75 C)
limit height (operating) 15,000 feet (5000 meters)
limit height (in oFF state) 50,000 feet (16,000 meters)
Dimensions (H x W x T) 10 "x 5" x 2.5 "(25.4 cm x 12.7 cm x 6.35 cm)
Weight (controller only) 1.4 kg
Setup: In a room ventilated
steel housing powder coating installation
Vertical mounting