Quantity
|
Out of stock
|
||
|
Charge Controller Steca Solarix PRS 1010
The simplicity and high performance of the new Steca Solarix PRS charge controller make it particularly appealing. At the same time it has a modern design and a convenient display, all at an extremely attractive price. Several LEDs in various colors emulate the accumulative display display, which gives information on the battery charge level. Here, Steca's latest algorithms are used to ensure optimal battery maintenance. Solarix PRS charge controllers are equipped with electronic fuse, thus ensuring optimum protection.
Solarix PRS - universal charge controllers, they can be used with lead-acid or gel batteries without the need for complicated setup configuration parameters. For larger projects, the charge controllers can be equipped with special functions such as: night light function, the choice of charge and over discharge protection
charge controller functions Steca Solarix PRS 1010:.
* series controller with low-loss
* PWM-control DC voltage charging
* battery charging with automatic charging mode selection (single work, high voltage, balanced)
* Recognizes and carries out the maintenance charge (high voltage charge every 30 days if idle)
* Automatic voltage regulation at the level of 12 V / 24 V
* Tok- depends on deactivation of the load
* Automatic resume load
* Temperature compensation < br /> * grounding "+"
* Integrated testing (17,0 V Start voltages)
display:
* 4 LEDs for displaying the battery charge state
* LEDs (red / green) d To view the state of the function
The protection functions:
* Battery protection against overcharging (HVD) and overdischarge (LVD)
* Automatic fuse
* Reverse polarity
* short-circuit protection
* Good electromagnetic compatibility protection
*
* Prevention of reverse current in the module
* Integrated temperature compensation of the voltage drop (from 0 ° C to +50 ° C , coefficient -4mV / K / cell)
SPECIFICATIONS:
- voltage - 12 V (24 V)
- Max. input voltage - 47
- Input battery voltage - 9.0 V - 17.0 V (17.1 V - 34.0 in)
- Max. Input Current - 10 A
- Max. Output Current - 10 A
- Max. auto-consumption - <4 mA
- charging voltage (float) - 13.9 V (27.8 in)
- Voltage boost charge (2 hours) - 14.4 (27.8 in)
- Voltage equalizing charge ( deactivated for hermetic AB) - 14.7 (29.4 in)
- re-connect the load point (SOC / U) -> 50% / 12.5 (25.0 in)
- tripping point during discharge (SOC / LVD) - <30% / 11.1 (22.2 in)
- Operating temperature range - -25 ° C ... +50 ° C
- Size terminals (wiring section) - 16 mm ^ (2 ) / 25 mm ^ (2)
- protection class - IP 34
- Weight - 350 g
- Dimensions (xwxh) - 187 x 96 x 45.3 mm
data obtained at 25 ° C / 77 ° F