Quantity
|
Out of stock
|
||
|
MPPT controller PC16-6015A.
has efficiency up to 98%.
Maximum charge current of the battery - 45 amperes (the controller is configured menu). Maximum input voltage from the solar panels - 150 V (can be connected in series to the output 250 3 of solar panels - 260 W). The result is a high input voltage controller and effective work in cloudy days, at dusk or dawn.
MPPT controllers removed from the solar panels to 15-40% more energy compared to PWM controllers
battery voltage is selected in the manual or automatic mode. It is possible to adjust the battery charging current.
Adaptive for maximum power point tracking algorithm allows to obtain the maximum amount of energy, even when a part of the solar panel is shaded
It is possible to adjust the charge current of the battery.
It is possible to connect more solar panels than the charge capacity of the battery - the controller will automatically limit the power output <. br />
There is a code controller fault indication. In the event of a breakdown is to determine the cause of the failure.
Automatic detection of day and night, protection against battery discharge at night through the solar panels. < br />
controller forced cooling by means of coolers. It is only activated when the controller is heating.
Protection:
deep discharge battery
, overcharge the battery,
< br />
overload
overheat
battery polarity
short-circuit.
specifications:
< br />
The maximum power of the battery charge current, A 60
battery voltage, V
12V-600W
< br /> 24v-1200w
36V-1800W
48V -2400Vt
maximum voltage applied to the photo-modules
open loop, V 100VDC 12V
145VDC 24V
145VDC 36V
< br />
145VDC 48V
Dimensions, 205h371.7h124.3
< br />
Weight 6,45
< br />.