CWS-1 - Controller battery charge controller
VSWR-1 is designed to charge the battery (AB) and provide power to loads of various types of sources such as wind turbines "bee" or photovoltaic modules. The controller can operate simultaneously with two istchnikami that facilitates the creation of a combined wind-solar system

The main functions of the controller:
* charge restriction of AB to the upper voltage level, taking into account the temperature dependence;
. AB * protection against deep discharge by disconnecting the load;
* balance software generated and energy used by various algorithms;
* display current parameters

C O O V N N E. X A R A C T E R I S T I K AND
rated voltage 12 V
AB type pluggable acid
capacity plug-AB 70 A • B
number of inputs from sources 2
Rated power sources 2x150 W
Nominal load power of 150 W

C O M P A T E K P O S T A V K &
* CWS controller -1;
* AB temperature sensor;
* light sensor;
* substitute load fuse (20A);
* description

A L T. O R Y T M N A V P R L E s N A T F Y W C O J
For the various tasks implemented the following algorithms for load management:
«charge" - the load is turned off, only the energy sources used for battery charging;
«LANTERN" - load controlled light source. The energy stored in the AB is used to power the illuminator in the evening and the morning. lighting duration depends on the balance of generated and used power .;
«PUMP" - AB controller supports to charge high level using the power load excess energy sources. The load in this mode can be, e.g., a pump, pouring some capacity. Or other load that will work only when there is wind;
«RADIO" - the controller disconnects the load only when the battery discharges. This mode is used when the load has a small capacity and must be run continuously or be controlled manually by the user.