Charge Controller EPSOLAR LS1024S

A distinctive feature of the series controllers LandStar S is the presence of the terminal block on the back side of the controller, it allows to build such a controller in a variety of architectural forms

Specifications:.
- The nominal voltage of the system - 12V / 24V DC auto selection
- rated power of the battery charging current - 10 A
- Maximum battery voltage - 32 V
- voltage drop (charge) - <0.26V
- voltage drop (discharge ) - <0.15V
- voltage equalization charge - AGM (sealed) AB: 14.6V; x2 / 24V;
Acid (serviced) AB: 14.8V; x2 / 24B
- voltage saturation charge - GEL (sealed) AB: 14.2V; x2 / 24V;
AGM (sealed) AB: 14.4V; x2 / 24V; Acid (served) AB: 14.6V; x2 / 24V
- float voltage - 13.8 V; x2 / 24V
- Power re-connect the load - 12.6; x2 / 24B
tripping point during discharge - 11.1; x2 / 24B
- Overall geometric size - 120h68h40mm
- Mounting size - 114h64mm
- Connections - 4 mm2
- Weight - 0.15 kg
- Max. Own consumption - <6 mA (24 V)
- Temperature Compensation - -30 mV / ° C / 12B (25 ° C)
- Temperature range - from -35 ° C ... + 55 ° C
- Humidity - 10% ... 90% (non-condensing)
- protection class - IP30

Features controller:

· voltage Regulation
· The ability to "hidden" mounting "
· Electronic fuse. Error when connecting equipment not withdraw from the system controller
· Pulse width modulation sequential charge current
· Automatic load connection at a charge of AB
· Temperature compensation.; a temperature sensor placed on the front panel 4
· charge mode: fast (forced) saturating equalizing supporting
· Ability to select the type of battery
· High reliability
· Tropicalization: Board controller protected waterproof coating (lacquer), which minimizes the deleterious effect of high humidity and
insects. . The terminals are protected against corrosion
· Ease of use - Landstar fully automatic device and does not require adjustments by the user, in addition to selecting the type of rechargeable battery

· parameters of accuracy is achieved by using a microcontroller
<. br /> Electronic protection:
· Sa Disabling after the final charge voltage AB
· load switching at an unacceptably low voltage AB
· protection against reverse polarity connections SB, AB and load
· protection against short-circuit (short circuit) at the input (Sa)
· short-circuit protection of the load
· overheat
· load protection at input overvoltage
· Low level electromagnetic radiation
· protection against open circuit AB
· Preventing at night through the discharge AB Sa
· Electronic fuse