Charge Controllers WS-C2415 6A 12V/24V

Controller with pulse-width modulation, for a charge of helium and AGM batteries. It applies in solar photovoltaic systems. Controllers Series WS-C have a protective function to improve efficiency and safe operation. Microprocessor controller using PWM (pulse width modulation) provides a quick charge from the solar modules. These controllers are used for all types of solar cells and various types of batteries

Features:.

- Automatic recognition of input voltage;

- apply different types of battery and solar cell;

- has built a central microprocessor and the system control function battery SOC (state of charge);

- at too low a battery voltage, the controller stops the power supply to prevent battery overcharge;

- controller automatically provide a constant charge of the battery by widely-width modulation (PWM) to the full battery

- preventing reverse charging solar panel at night. .

- short-circuit protection;

- thunder protection

specifications:

The rated voltage - 12V. / 24V Automatic voltage

recognition Max. load current, A - 6
Input voltage range - 12 --- 17V / 24V --- 34V
length <= 1 m drop charge cycle - 0.25 V
length <= 1 m drop discharge cycle - 0.05
overvoltage - 17V / 34V
shutdown battery voltage - 13.7 / 27.4V
Enable when the battery voltage of - 11V ~ 10.5 / 21B ~ 22B
temperature compensation - -3 mV / ° C / cell
current consumption without load - <= 10 mA
ambient temperature - -25 ° C --- +55 ° C
Dimensions, mm: 134 * 100 * 31
Weight, g: 260