Quantity
|
Out of stock
|
||
|
ACM charge controller 12B 5024Z 50A / 24B
When using solar cells as a power source, the charge current must be controlled according to the battery voltage. This requires a charge controller. Charge controller 12B ACM 5024Z 50A / 24B with LED indicator lights - simple device for performing the given work
Advantages charge controller ACM 5024Z 50A 12B / 24B:
• Supports full
• Protects the battery from over charging
• Protects the battery from the electric power supply from the solar panels at night
• protection against reverse polarity of the battery
• reverse polarity protection for solar panels
• Auto-lock "self-protection" if the current exceeds the speed controller
• Automatic blocking of "self-protection mode" when a short circuit occurs
• protection against lightning strikes
• Automatic temperature compensation
• The LCD screen displays the charging current, the discharge current and battery voltage every 5 seconds
• Continuous charge and discharge amount of the current hour battery
• Automatic adjustment of charge-on / off load-on / off and eg zheniya depending on the battery voltage level
• Manual adjustment of the charge-on / off and load-on / off voltage (option)
Specifications:
- Rated voltage: 12V , 24V (voltage is detected automatically)
- The nominal power of the storage battery charge current: 50A
- Rated voltage: DC12V / 24V
- Maximum current: 50A
- solar power: less or equal to 50 V
- charging voltage (set): 13.8V / 27.6V
- protection of low voltage (set): 10.7V / 21.4V
- no-load loss: less than or equal 30 mA
Fall circuit voltage: less than or equal to 170mV
- charge mode: the PWM mode
- Temperature compensation: -4mV / Cell / C
- The maximum size of the cable - AWG # 7 (16mm2)
- Operating temperature: -10 ° C ~ 60 C
- storage temperature: -30 ° C ~ 70 C
- temperature requirement: less than or equal to 90%, non-condensing
- Dimensions: 90 x 188 x 48 mm
- Call oyanie mounting holes: 60 mm x 178 mm - F5
- Weight - 660 g