Charge Controllers ACM 1524 15A 12В/24В

The charge controller 15A Acm 1524 12B / 24B

When using solar cells as a power source, the charge current must be controlled according to the battery voltage. This requires a charge controller. The charge controller 15A Acm 1524 12B / 24B with LED indicator lights - simple device for performing the given work

Features:

1. Intuitive LED display indicating the current battery capacity. in the system, the state of charge and discharge
2. The presence of security features from over-charging, over-discharging, overload, short circuit and reverse connection.
3. Charging the tandem type PWM increases charging efficiency at 3% - 6% in comparison with the charging without PWM.
4. Charging and discharging parameters are set at the factory (special parameters must be reported in advance)
5. Ability to set the load mode operation

Specifications:
- Rated voltage. : 12V / 24V (voltage detected automatically)
- Nominal power rechargeable battery charging current: 15A
- voltage 12V / 24V
system - Overload and short-circuit protection - 1.25 times rated current, the protection load for 60 seconds; 1.5 times more than the rated current, load protection for 5 seconds. 2.5 times or more, from the short circuit
-. No load losses - is less than or equal to 12 mA (not including USB)
- Voltage drop charge (discharge) a chain - <0.2

discharge:
- circuit voltage drop - <0,15
- ambient temperature from -20 ° C to +50 ° C
- Lifting voltage 14.4V / 28.8V ; (Duration: 10 min)
- Supporting the charge voltage of 13.7V / 27.4V
- Temperature compensation -4mv / cell / ° low protection voltage of 10.7V / 21.4V
- Low voltage reconnection 12.6 V / 25.2V
- Charge PWM mode
- Installation hole diameter 3.5-55mm * 122mm
- cabling diameter less than or equal to 16mm2

Dimensions (L * W * H) - 130mm x 75mm x 38mm
Weight - 145 g