Inverter Steca XPC 1400-12

Inverters Compact series consist of 3 fully automatic devices: sine wave inverter, a battery charger and transfer relay. Studer and experience level of performance ensures high reliability and performance of these devices

inverter Features:..
pure sine wave at the output of inverter
Suitable electrical load to any
reliable and noiseless work with any loads
high overload capacity
obraruzheniya load level is regulated in a wide range
4-stage charger
Ultra-fast switch relay
High efficiency
Full internal protection
Ultra-regulation
microprocessor control

certification standards E:
XPC 1400-12 certified in accordance with ECE-R 10. This certification requirements is mandatory for European Union for all electronic devices used on vehicles

Multifunctional contact:.
devices include a programmable contact at a maximum current of 16 A. The operation of contact may be programmed to the voltage level Nia AB, as well as various system status (alarms, presence network, the presence of sunlight, etc. They provide:
- Automatic shutdown non-critical loads at various events
- Alarms, acoustic signals, etc.
- Charge AB on different algorithms

The optional built-in charge controller for solar panels (model -S index):
The models XP Compact can be equipped with an optional built-in PWM charge controller from the solar panels. This makes these devices multifunctional and fully sufficient for autonomous solar power

Main technical characteristics of the inverter Steca XPC 1400-12:.

rated voltage 12V battery
input voltage range 9.5 - 16B
continuous power at 25 ° C 1100Vt
power 30 min. at 25 ° C 1400W
load 5 seconds. at 25 ° C 3 x Pn.
Maximum Power Up until a short circuit
Max. Prior asymmetrical load Pnom
load detection (pending) 1 to 25W
Cos j 0.1 -. 1
maximum efficiency 94%
consumption in OFF / pending / ON 0.5 / 0 6 / 4W
Net Output voltage sine wave 230Vac (+ 0 / - 10%) (XPC also available 120Vac)
output frequency of 50Hz +/- 0,05% (quartz)
Harmonic distortion <4%

battery charger (the step 4) IU-Uo-Align (every 25 cycles)
adjustable charging current 0 - 45A
input current balance adjustment is not available
Maximum input voltage range 265Vac
voltage changes. Adjustable threshold current of 150 to 230Vac (also available on XPC 120Vac)
input frequency of 45 - 65Hz
Changing power factor EN 61000-3-2

control batteries (adjustable thresholds and time user):
saturation stage duration 0-4 hours
End charge cycle * 14.4V voltage
support 13,6V
duration equalization step 0-4 h
equalization step voltages 15,6V
protection against deep discharge 10,8V
Temperature compensation (with optional CT-35) -3mV / ° C / Cell

General data: < br /> Multifunctional. Programmable contact 16A - 250Vac (potentially available 3 points)
16A maximum current relay transmission
Transfer Time <40 ms
Weight 11.7 kg
HxWxL Dimensions [mm] 124x215x410 < br /> IP20 degree of protection (IP22 with the upper cover C-IP22)
according to EU standard EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, < br /> Low directive 2006/95 / EC: EN 62040-1-1, EN 50091-2, EN 60950-1
working temperature range from -20 ° C to + 55 ° C
Relative humidity 95% non-condensing fan
Turning above 45 ° C
noise <40dB / <45dB (without / with fan)

optional solar charger (the step 4) IU-Uo -vyravnivanie (every 25 cycles):
Max. open circuit voltage PV 25V
Max. charging current 30A
charge curve IU-Uo-alignment (every 25 cycles)

Options:
remote control panel RCC-01
temperature sensor CT-35
The communication cable 20 m RPS-01