AC solar inverter with backup function 10kW, 380V, three-phase (Model InfiniSolar 10kW)
The three-phase AC solar inverter with backup function (working with batteries) 10 kW, 380 V, Model-InfiniSolar 10KW

Manufacturer phase network (on-grid) solar inverter with backup function InfiniSolar 10kW - company Voltronic power (Taiwan)

Voltronic power -. one of the world's major manufacturers of electrical goods, including ., And network inverters
AC three-phase inverter with backup function Infini Solar is a complete analog inverters series ABi-Solar, Stark country, MPP solar, and is produced by the same company - Voltronic Power
Network (on-grid). solar three-phase (380V) inverter with backup function (back-up) power 10kW InfiniSolar 10kW simultaneously combines such features:

-Works as a regular network solar inverter. At the same time in the inverter models have 2 independent MPPT tracker that allows you to connect to the inverter two solar groups with different lighting conditions. For example, the solar panels with the southern slope of the roof on one input, and on the north slope of the roof to the other input. Thus it is possible to maximize the production of solar energy.

-works as an uninterruptible power supply (UPS).
-works as a stand alone inverter.
-works as a charger for the batteries. Charging can be done either by solar panels or from the network.
-Allows manage power sources (mains, solar cells, batteries) that you are using at any given time. This is an important feature that allows you to use solar energy as much as possible and to optimize your energy costs. You, for example, can choose to sell excess electricity on the "green tariff" or accumulate surpluses in batteries for further minimize power consumption of electricity.
Since 2015. . InfiniSolar 10kW inverters provided for the possibility of parallel operation of up to three inverters to back door

So, to backup the inverter output can be connected load up to a total capacity of 30kW

Specifications:. < br />
Max. Power of connecting solar power, W - 14850 W
Rated power - 10000 W
Max. The charging capacity - 9600 W

Network Mode:
Solar panel (input DC characteristics)
Rated DC voltage - 720 V
maximum allowable voltage of solar panels - 900 In
minimum voltage for the inverter starts working - 350
voltage range tracking point max. power (MPPT) - 400 - 800 Number
MPPT trackers - 2
maximum current, A - 2 x 18.6 A

AC output characteristics
Nominal output voltage - 400 V / 230 V per phase
The allowable range of the output voltage - 184 - 265 V per phase
The allowable frequency range - 47.5 ~ 51.5 Hz
Max.. Output Current - 13 A per phase power
Coefficient (Power Factor)> 0.99

Effectiveness (efficiency)
Max. conversion efficiency of the DC-AC> 96%
Max. the efficiency of conversion from DC to AC by EU standards> 95%

Standalone mode:
input an AC voltage
resumption of - 180 V per phase
valid range of the input voltage - 170 - 280 V per phase
Max. Input Current - 25 A

Solar panel (input DC characteristics)
Max. Power of connecting solar power, W - W 14850
maximum allowable voltage of solar panels - 900
voltage range tracking point max. power (MPPT) - 400 - 800 Number
MPPT trackers - 2
maximum current, A - 2 x 18,6A

AC output characteristics (conversion postoyannygo current from the battery to alternating current)
Nominal output voltage - 400V / 230V per phase
output frequency - 50 Hz sinusoid
- Pure sine
conversion efficiency DC battery into alternating - 91%

AC inverter mode with backup function (grid-tie with back-up):
Solar panels (input DC characteristics)
Max. Power of connecting solar power, W - 14850 W
Rated voltage DC - 720 V
The maximum allowed voltage of solar panels - 900
The minimum voltage to start the inverter - 350 V range
max stress point tracking. power (MPPT) - 400 - 800 Number
MPPT trackers - 2
maximum current, A - 2 x 18,6A

AC output characteristics:
Nominal the output voltage 400 V / 230 V per phase
The allowable range of the output voltage - 184 - 265 V per phase
The allowable frequency range - 47.5 ~ 51.5 Hz
Max.. Output Current - 13 A per phase power
Coefficient (Power Factor)> 0.99

AC input characteristics:
resumption of the voltage - 180 V per phase
Acceptable range input voltage - 170 - 280 V per phase
Max. Input Current - 25 A

AC output characteristics (conversion of a DC from the battery into alternating current)
Nominal output voltage - 400 V / 230 V per phase
output frequency - 50 Hz sinusoid
- Pure sine
conversion efficiency DC battery into alternating - 91%

battery charge:
Nominal battery voltage - 48 V Maximum
The default charge current-60A, 10A - 200A (user adjustable)

General characteristics:
dimensions, LxWxH, mm - 622 x 500 x 167.5
Weight - 45 < br /> data Ports - RS-232 / USB, CAN Interface
Additional slots SNMP, Modbus, AS-400
Relative humidity - 0 ~ 90% (without kodensata)
Operating temperature, C - -10 to + 55 ° C
Altitude - 0 ~ 1000 meters