Inverter Pulse IPI- 60V/220V-1,0kVA-50Hz

Inverter Pulse IPI- 60V / 220V-1,0kVA-50Hz

1 Purpose

1.1 Voltage converter 60V DC IPI 60V / 220V.1,0kVA.50Hz (hereinafter - converter) designed to supply electricity to the power consumption of the receivers to 1000VA single phase 220V 50Hz AC
1.2 converter is designed for continuous clock work indoors under the following environmental conditions:
- from ambient temperature to 0C. 40C;
- relative humidity to 95% at a temperature of + 25C

2 basic specifications and characteristics

2.1 Standard value DC 60V power supply voltage. .
2.2 Working range voltage DC power (56 ... 73) In.
2.3 Permitted voltage DC power range (52 ... 75) In.
2.4 Standard value AC output voltage (2202 ) In.
2.5 nominal frequency . S output voltage (501)
2.6 Hz Nominal value of the total load power 1000VA
2.7 Operating range of load power of from 0 to 100% of nominal load
2.8 Type -.. Active, active- . inductive, capacitive-active, non-linear (rectifier filter)
2.9 Operating range of load power factor 0.7 ... 1
2.10 overload power factor of 1.7:. 1 during 5c ​​
2.11 ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%.
2.12 The current consumed by the converter at nominal input voltage and full load power, not more than 20A.
2.13 converter has protection overload and short-circuit of the load, from the reduced or increased voltage supply polarity voltage supply connection and also from overheating.
2.14 Automatic disconnection occurs at a converter output tense tions for the power range. Automatic activation of the transducer occurs when returning power within the operating range.
2.15 Dielectric strength between the closed and the input terminals of the converter housing between the closed and the output terminals of the converter housing, and between the closed and the input terminals of the inverter outlet closed, can withstand without breakdown test voltage of 1000 V alternating current frequency of 50 Hz (effective value) in the for 1min.
2.16 Efficiency converter at nominal input voltage and full power of the load, at least
0.85 2.17 Cooling method -. forced ventilation with temperature control of the air supply
2.18 Dimensions converter (Wxhxd, without protrusions) 255x85x190mm. .
2.19 converter Weight, 4,0kg.