Quantity
|
Out of stock
|
||
|
Inverter Pulse IPI-220V / 220V-3,0kVA-50Hz - DC voltage converter 220 IPI.220V / 220V.3kVA.50Hz current (hereinafter - converter) designed to supply different power receivers with a power consumption to 3000VA single phase 220V AC, . 50Hz
converter is designed for continuous clock work indoors under the following environmental conditions:
- ambient temperature from 0C to + 40C;
- relative humidity to 95% at a temperature of + 25C.
basic specifications and characteristics
1 Rated value DC supply voltage 220V AC.
2 Operating range DC voltage supply (180 ... 246) In.
3 Acceptable DC power supply voltage range (170 ... 252) In.
4 Nominal value of the AC output voltage (220 2).
5 Nominal frequency voltage output (50 1) Hz.
6 Nominal value of the total load power 3000VA.
7 Work load power range from 0 to 100% of the rated value.
8 load Type - active, active-inductive, capacitive-active, non-linear (with the filter rectifier)
9 operating range of load power factor (0.7 ... 1)
10 overload power factor 1.7: 1 for 5 seconds
11 ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%
<.. br /> 12 current consumed by the converter at nominal input voltage and full load power, not more than 16A.
converter 13 has an overload protection and short circuit across the load reduced from a high input voltage, from reverse polarity voltage supply, as well as overheating.
converter 14 automatically disable It occurs at the output of power supply voltage range. Automatic activation of the transducer occurs when returning to power supply voltage operating range.
15 Dielectric strength between the closed and the input terminals of the converter housing between the closed and the output terminals of the converter housing, and between the closed and the input terminals of the inverter outlet closed can withstand without breakdown test voltage of 1000 V alternating current frequency of 50 Hz (effective value) for 1min.
16 Efficiency . Converter at nominal input voltage and full load power, at least 0.88
17 Cooling method -. Forced ventilation with temperature control of the air supply
18 Dimensions converter ( Wxhxd) 400x100x260mm.
converter 19 Weight, 9,0kg.