Inverter Pulse IPI-220V/220V-1,5kVA-50Hz

Inverter Pulse IPI-220V / 220V-1,5kVA-50Hz

1 Purpose

1.1 Voltage converter 220V DC IPI 220V / 220V.1,5kVA.50Hz (hereinafter - converter) designed to supply electricity to the power consumption of the receivers to 1500VA single phase 220V 50Hz AC
1.2 converter is designed for continuous clock work indoors under the following environmental conditions:
- from ambient temperature to 0C. 40C;
- relative humidity to 95% at a temperature of + 25C

2 basic specifications and characteristics

2.1 nominal supply voltage value of DC 220V. .
2.2 Working voltage DC power range (180 ... 246) In.
2.3 Acceptable DC power supply voltage range (170 ... 252) In.
2.4 Standard value AC output voltage (220 2).
2.5 Nominal value . E frequency of the output voltage (1 50)
2.6 Hz Nominal load value total power 1500VA
2.7 Work load power range from 0 to 100% of nominal load
2.8 Type -.. Active . active-inductive, capacitive, active-nonlinear (rectifier filter)
2.9 Operating range of load power factor 0.7 ... 1
2.10 overload power factor of 1.7:. 1 during 5c ​​<. br />2.11 ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%.
2.12 The current consumed by the converter at nominal input voltage and full load power, not more than 8A.
2.13 converter a protection against overload and short circuit across the load reduced from a high voltage power supply polarity voltage supply connection and also from overheating.
2.14 converter Automatic disconnection occurs at the output voltage power supply outside the permissible range. Automatic activation of the transducer occurs when returning power within the operating range.
2.15 Dielectric strength between the closed and the input terminals of the converter housing between the closed and the output terminals of the converter housing, and between the closed and the input terminals of the inverter outlet closed, can withstand without breakdown test voltage of 1000 V alternating current frequency of 50 Hz (effective value) in the for 1min.
2.16 Efficiency converter at nominal input voltage and full power of the load, at least
0.85 2.17 Cooling method -. forced ventilation with temperature control of the air supply
2.18 Dimensions converter (Wxhxd, without protrusions) 305x85x210mm. .
2.19 converter Weight, 5,0kg