Inverter Pulse IPI-220V/220V-1,0kVA-50Hz

Inverter Pulse IPI-220V / 220V-1,0kVA-50Hz

1 Purpose

1.1 220V DC voltage converter IPI.220V / 220V.1,0kVA.50Hz current (hereinafter - converter) is designed to supply electricity to the power consumption of the receivers to 1000VA single phase 220V 50Hz AC
1.2 converter is designed for continuous clock work indoors under the following environmental conditions:
- ambient temperature of 0C. to + 40C;.
- relative humidity to 95% at a temperature of + 25C

2 basic specifications and characteristics

2.1 Standard value DC supply voltage 220.
2.2 Working voltage DC power range (180 ... 246) In.
2.3 Permitted voltage DC power range (170 ... 252) In.
2.4 output AC voltage nominal value ( 220 2).
2.5 Nominal value . E frequency of the output voltage (1 50)
2.6 Hz Nominal load value total power 1000VA
2.7 Work load power range from 0 to 100% of nominal load
2.8 Type -.. Active . active-inductive, capacitive, active-nonlinear (rectifier filter)
2.9 Operating range of load power factor 0.7 ... 1
2.10 overload power factor of 1.7:. 1 during 5c ​​<. br />2.11 ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%.
2.12 The current consumed by the converter at nominal input voltage and full load power, not more 5,5a.
2.13 converter has an overload protection and short circuit across the load reduced from a high voltage power supply polarity voltage supply connection and also from overheating.
2.14 Automatic disconnection occurs at the output transducer ie supply voltage outside the permitted range. Automatic activation of the transducer occurs when returning power within the operating range.
2.15 Dielectric strength between the closed and the input terminals of the converter housing between the closed and the output terminals of the converter housing, and between the closed and the input terminals of the inverter outlet closed, can withstand without breakdown test voltage of 1000 V alternating current frequency of 50 Hz (effective value) in the for 1min.
2.16 Efficiency converter at nominal input voltage and full power of the load, at least
0.85 2.17 Cooling method -. forced ventilation with temperature control of the air supply
2.18 Dimensions converter (Wxhxd, without protrusions) 255x85x190mm. .
2.19 converter Weight, no more than 4.5 kg.