UPS (OFF-Line) 5048C (48В, 5000Вт) SANTAKUPS

voltage inverter with pure sine wave IR series is a compact device that includes an inverter, battery charger and an automatic switch. These components form a single system with the peak conversion efficiency of 88%. The inverter provides the improved power factor, a complex multistage charging and clean sinusoidal output voltage with excellent overload capability to meet the requirements regarding the power supply for inductive loads, without calling endanger equipment. Using a highly MOS transistors 16-bit microprocessor with a frequency of 4.9 GHz and a high-power transformers of the inverter outputs alternating current with a pure sine wave with an average total harmonic distortion of 15% (at least 5%, maximum 25%), depending on the load current and battery voltage

Features:
ability to withstand high overload - up to 300% of rated power (20 seconds)
Low power consumption (especially in a power saving mode) in order to save. electricity
4- tupenchataya intelligent battery charging, PFC (Power Factor Correction) 5 to select predetermined type of battery charger plus Desulphation fully discharged battery
high charging capacity, adjustable in the range of 0-100%
Typical switching speed between the accumulator and the source AC -10 ms and current continuity guaranteed
Smart remote control (optional)
delay 15 s before switching after the inverse AC interruption (complement Yelnia protection when using the generator)
can run and transmit power with discharged batteries
conductive 30/40 A capacity
cooling fan with variable speed
multi-system protection
3 mode when the priority of batteries (battery priority)

inverter specifications:

The output of the inverter power: 5000 W
overload capacity: 15000 W
output voltage: 220 B
output waveform: Pure sinusoi further tension
Protection against short-circuit current limiting function (failure mode 1 second)
typical switching time: 10 ms (max.)
Frequency: 50/60 Hz ± 0.3 < br />
DC input
Nominal input voltage: 48 volts
consumption in standby mode (search mode): Less than 25 W
minimum starting voltage: 10 V
alarm high. voltage and failure: 16


Allowable Charging voltage range: 155-272 B
input frequency range: 40-80 ± 0.3 Hz for 50 Hz
The maximum charge current: 40 ± 5 A
protection (disconnection) of overcharging: In 62.8

bypass and protection
form input voltage signal: sinusoidal wave
Rated voltage: 220 V
low off voltage: 155 In
Restarting at a low voltage: 164 In high
off voltage: 272
Restarting at high voltage: 265 V < br /> Nominal input frequency: 50Hz
Low off frequency of 40 Hz ± 0,3 Hz for 50
Restarting at a low frequency of 44 Hz ± 0,3 Hz for 50
High off speed: 80 ± 0,3 Hz to 50 Hz
Restarting at high frequency: 75 Hz ± 0,3 Hz for 50
level BYPASS fuse: 30A
Dimensions: 620 x 225 x 180 mm
Weight: 43 kg
display: LED status indicators (LED) + LCD display (LCD)