Quantity
|
Out of stock
|
||
|
voltage inverter with pure sine wave IR series is a compact device that includes an inverter, battery charger and an automatic switch. These components form a single system with the peak conversion efficiency of 88%. The inverter provides the improved power factor, a complex multistage charging and clean sinusoidal output voltage with excellent overload capability to meet the requirements regarding the power supply for inductive loads, without calling endanger equipment. Using a highly MOS transistors 16-bit microprocessor with a frequency of 4.9 GHz and a high-power transformers of the inverter outputs alternating current with a pure sine wave with an average total harmonic distortion of 15% (at least 5%, maximum 25%), depending on the load current and battery voltage
Features:
ability to withstand high overload - up to 300% of rated power (20 seconds)
Low power consumption (especially in a power saving mode) in order to save. power
4-speed intelligent battery charging, PFC (power Factor Correction) 5 to select specific types of the battery charger plus Desulphation fully discharged battery
high charging capacity, adjustable in the range of 0-100%
Typical switching speed between the battery and AC power source of -10 ms and current continuity guaranteed
Intelligent remote control (Optional)
Delay 15 s before switching after the interrupt inverse AC (extra protection when using the generator)
can run and transmit power with discharged batteries
conductive 30/40 A capacity
The cooling fan with variable rotation speed
multi-system protection
3 modes when the priority batteries (battery priority)
inverter specifications:
output of inverter
Power: 4000 W
overload capacity: 12000 W
Rated output voltage: 220 B
output waveform: Pure sinusoidal voltage
protection against short-circuit current limiting function (failure mode 1 second)
typical switching time: 10 ms (max)
frequency:. ± 0.3 50/60 Hz
DC input
Nominal input voltage 48 Volt
consumption in standby mode (search mode): Less than 25 W
The minimum starting voltage: 10 V
Alarm high. voltage and failure: 16
Allowable Charging voltage range: 155-272 B
input frequency range: 40-80 ± 0.3 Hz for 50 Hz
The maximum charge current: 35 ± 5 A
protection (disconnection) of overcharging: In 62.8
bypass and protection
form input voltage signal: sinusoidal wave
Rated voltage: 220 V
low off voltage: 155 In
Restarting at a low voltage: 164 In high
off voltage: 272
Restarting at high voltage: 265 V < br /> Nominal input frequency: 50Hz
low off frequency of 40 Hz ± 0,3 Hz for 50
Restarting at a low frequency of 44 Hz ± 0,3 Hz for 50
High frequency disable: 80 ± 0,3 Hz to 50 Hz
Restarting at high frequency: 75 Hz ± 0,3 Hz for 50
level BYPASS fuse: 30A
Dimensions: 620 x 225 x 180
mm Weight: 39 kg
display: LED status indicators (LED) + LCD display (LCD)