Quantity
|
Out of stock
|
||
|
voltage inverter with pure sine wave IR series is a compact device that includes an inverter, battery charger and an automatic switch. These components form a single system with the peak conversion efficiency of 88%. The inverter provides the improved power factor, a complex multistage charging and clean sinusoidal output voltage with excellent overload capability to meet the requirements regarding the power supply for inductive loads, without calling endanger equipment. Using a highly MOS transistors 16-bit microprocessor with a frequency of 4.9 GHz and a high-power transformers of the inverter outputs alternating current with a pure sine wave with an average total harmonic distortion of 15% (at least 5%, maximum 25%), depending on the load current and battery voltage
Features:
ability to withstand high overload - up to 300% of rated power (20 seconds)
Low power consumption (especially in a power saving mode) in order to save. power
4-speed intelligent battery charging, PFC (power Factor Correction) 5 to select specific types of the battery charger plus Desulphation fully discharged battery
high charging capacity, adjustable in the range of 0-100%
Typical switching speed between the battery and AC power source of -10 ms and current continuity guaranteed
Intelligent remote control (Optional)
Delay 15 s before switching after the interrupt inverse AC (extra protection when using the generator)
can run and transmit power with discharged batteries
conductive 30/40 A capacity
The cooling fan with variable rotation speed
multi-system protection
3 modes when the priority batteries (battery priority)
specifications:
waveform input voltage: Sine wave
Rated power - 1500 watts Peak power
- 3000 W
battery voltage - 12 V
battery charging current - 35 +/- 5 amps
efficiency - 95%
Dimensions - 590 * 333 * 310 mm
Weight - 19 kg
display: LED status indicators (LED) + LCD display (LCD)