Quantity
|
Out of stock
|
||
|
The uninterruptible power supply UPS-1,5 / UH-3C is designed to provide uninterrupted power consumers with total capacity of 1.5 kW single phase 220V 50Hz alternating voltage when the external network or its complete absence.
UPS 1.5 / 3C-VG . / FM - with inputs from wind turbines and photovoltaic module
The energy supply to consumers can be stored in external batteries with a nominal voltage of 24V from two sources:
- external 220V 50Hz, by operation of the charger;
- wind turbine or wind turbine-075M-08 multiplier
not recommended source for use with equipment that can be damaged when the power breakdown
FEATURES:
-. maintaining AB in a charged state by the charge of 220V / 50Hz network wind turbines and PEM;
- uninterrupted power to the main load of 220V / 50Hz AC or inverter in the absence of a network or in a network power saving mode *; - additional powered load from the inverter to the power saving mode energy;
- protection AB deep discharge by disconnecting loads while reducing stress;
- additional protection from:
output short circuit < br /> overload
overheating
- temperature compensated charging voltage AB;
- digital display parameters:
operation mode (charge the rechargeable battery, an inverter, expectation)
percentage charge AB
power load connected to the UPS (inverter)
time to discharge battery at the current load power
reports triggered protection
- transmission via RS232 or RS485 data (possible option);
* - save mode mains power when fully charged battery and the presence of "extra" power wind turbines or PEM, first main load is powered by the inverter, then an additional load is switched. Then, with a decrease in the charge level of AB, initially disabled ext. load, and then transferred to the main power supply. This mode can be enabled or disabled by the user.
SPECIFICATIONS
Basic parameters
Rated power (at UAB = 24V) VA 1500 *
Continuous power (without overheating) VA 1100 *
Maximum Power (at UAB = 24V) VA 3000 *
connectable wind turbines the wind turbine-power 08
plug PEM to 350 watts power storage
VA 600 at the inverter output voltage (sine wave) / Hz 220 ± 5% / 50
load switching time (power / inv.) 0.02 sec
Type AB acid
voltage AB, V 24
Min. / max. strain AB, B 21/30
recommended capacity / capacities range AB, AH 190 / 50-500
Max. allowable input voltage of the network B 265
voltage connection to the network 200
voltage disconnect from the network 176 in
Dimensions, mm 320h266h260
Weight kg 24
* - when connecting the load reaction type must be considered cos (fi)
The calculation of the operating time of the AB
load, W battery capacity AH
120 190 240 < br /> 200 10.4 hours 16.4 hours 20.7 hours 500
3.9 h 6.5 h 8.3 h
800 2.4 h 3.9 h 5.0 h
1100 h 1.5 h 2.6 h 3.6