Battery Solar KV 90W / 12V

Solar module KV-90
Photovoltaic modules noticeably different high reliability, efficiency, and ability to work in various climatic conditions. Manufacture of solar modules is happening at the present Special technological about-rudovanii using materials of leading world manufacturers: Etimex PP GmbH, Isovolta, Ulbrich, Creativ, S.E.Project. prefabricated modules parameters are checked on the tester solar modules of class A firm Belval SA

Purpose: transformation of solar energy into electricity
Source material: monocrystalline silicon
protection: coating - double laminate. toughened glass with high light transmittance (92%), 3 mm thick
frame: anodized aluminum
Sorting box: polycarbonate, glass filled

qualification tests include: thermal
200 cycles from -40 C to 85 C. 10 cycles moisture / freezing by 85 C at a relative humidity of 85% to -40 C.
Impact test iceball.
Exposure to ultraviolet light.
High humidity during exposure to high temperature.
Endurance to superheated spot.
Mechanical resistance. The module can withstand a uniformly distributed load of up to 2400 Pa, applied to the front or back surface. This corresponds to the maximum modulated wind gust of 225 km / h (62.5 m / sec) with a safety factor of 3.

module type KV-90W / 12V current at max power, A 5,0 Stress at max power in 18,0
fault current, A 5,6
load voltage, V 21.7
Dimensions, mm 1210x527x35
Weight 7,5