Tracker horizontal uniaxial automatic S250

The principle of the model S250 tracker - a high rotational stiffness while maintaining a natural frequency of about 2 Hz. It also possesses exceptional resistance to
eccentric distribution of loads which may occur under extreme wind.
high stiffness and strength of main support tube allows the support posts to be at a distance of 6 meters from each other, reducing costs man- hours and materials during build time (as compared with the more expensive foundations with smaller gaps).
drive mechanism may drive up tables 12 (each of up to 42 m in length, 3 m in width and about 20 kW power), allowing . mayor, the installation modules the total capacity up to 250 kW per drive mechanism

FEATURES
Type:. Modular, horizontal single-axis solar tracker
rotation range: -48 ° to + 85 °
maximum surface area: 124 m on one table and to 1488 m on the system (12 tables)

MOUNTING FEATURES
Possible types of bases:.. Pile stabbed bedding, Pile concreted into the ground The pile with a concrete ballast arrangement, pile journalled on a helical support
distance between the tables up to 8 meters (ReCom . Theo- least 7 meters)
distance between the bases for each panel: 5-6 meters
minimum distance from the ground during operation:.
0.5 meter maximum height during operation: 2.6 meters
% ground cover 35% -50%
slope of the ground surface: 17 ° (if more bias - the required individual solutions)

ELECTRICAL
230 / 400V 3-phase alternating current of ± 10%, 50-60 Hz
240 / 480V 3-phase alternating current of ± 10%, 60 Hz
Daily energy consumption: 0.25 KV / h and usually up to 0.35 KW / h maximum

mecha- nism DRIVE
Type: Hydr avlichesky
Maintenance: Annual inspection and lubrication of the moving cylinder joints, Change hydraulic oil and filter every 5 years
Seasonal change the oil at high temperature difference in winter and summer


MANAGEMENT sun tracking mechanism: Astronomical open loop algorithm
tracking Accuracy: 1 °
tool to track the tilt angle: inclinometer
return to its former position yes
Remote monitoring and control of a full, in real-time via the Internet
function Plug & Play: use of GPS for Timing and positioning


WITHOUT PASNOST Development has fully complied with all the requirements of Eurocode 3
Automatically adjusts the level frame during tilting of extreme weather conditions
Operating mode: positioning at any angle solar panel
at wind speeds up to 50 km / h

FRAME
Drive hydraulic system, isolated from the external environment. May operate in a desert environment at any combination of sand and moisture
framing elements: hot galvanized method
hinge elements not lubricated spherical stainless steel compound (maintenance free)

I CONDITIONS OUTSIDE ENVIRONMENT Shnei
working temperature range: -20 ° C to +60 ° C
staked snow layer: 160 kg / sqm 1