The number of leads - four
Material - Copper
Class - 1-thingwire
Insulation Material - PVC plasticized
insulation resistance (Mohm \ km) - 7
Cores ( Mom \ km) - 1.83
sheath Material - PVC plasticized

cable D (mm) - 16.3
cross section (mm2) - 10
Weight (kg \ km) - 519
copper Weight (kg / km) - 348.5

cable Application VVG 4x10:
VVG 4x10 - power copper cable with four conductors, conductive insulation and sheath of plastic.
monolithic four-core power cable VVG 4 * 10 typically used in transmission, distribution of electricity in fixed installations - power and lighting networks where the rated voltage is 1000 - 660 volts, and the frequency - 50 Hz. With this type of cable electrical products produced washing e / e of power assemblies, boards for power distribution on floors, machinery, machine tools and mechanisms that have a fixed connection, lighting equipment, electrical installation, etc. To get the power cable, usually used trays gasket in special cable ducts, hoses and the metal corrugated pipe, cable racks purpose, technical plastic pipes, in building constructions using blocks and beams. Please be aware that the type of cable VVG when laid does not support combustion. But afraid of the impact of mechanical factors and strong strains. Laying in air is subject to the temperature tolerance range - from - 40 C to +50 C. Cabling soil strictly requires use of special protective tube.
It should be noted that the type of cable VVG 4x10 has no limitations in the levels of trails for laying. It can be laid on the vertical tracks. Cable application VVG applies to network with alternating voltage with a grounded or insulated neutral. The duration of the work in the format of a single-phase short circuit on the ground does not exceed the figure of 8 hours. The total duration of the work under the same conditions shall not exceed 125 hours per year. You must know that when laying the cable in bunches, it is necessary to strengthen the special fire protection means.

Perform VVG 4 * 10:
Cable VVG 4 * 10 is made according to GOST, and consists of four of conductors: copper, twisted, solid or stranded. Cores can be both round and sector. Insulation provided shell PVC, different color to distinguish between a living destination. Also, the shell in black, made of PVC, which follows the shape of cable cores twisted.

Characteristics power copper cable VVG 4 * 10:
nominal voltage of 0.66 kV;
Without preheating the cable is laid, if the temperature does not exceed 15 ° C.
Use cable at an external temp. ± 50 ° C;
Lifetimes under normal conditions of use of at least 25 years.
permissible temperature of conductors in the case of continuous operation does not exceed + 70 C;
Insulation Resistance (one km, 20 ° C) - at least 7 Mohm;
Peak heating temperature when an lived short circuit (4) - 160 degrees
upper boundary heating lived in an emergency (duration - no more than eight hours per day) - + 80C;
cable test voltage is checked within 10 minutes: 3000
nominal voltage during operation in the three-phase 0.72 kV
Allowable bend radius during installation cable VVG 4 * 10 should be at least 150 mm 3.
Indicators permissible value of tensile force at installation works of cable VVG of this type should not exceed 2000 Newtons.
duration of short circuit should not exceed 5 seconds
Reserve heating temperature conditions nonincendive lived short-circuit is not more than +350 degrees Celsius
cable has a weight - 348,5kg / km..;
outer diameter - 16.3 mm
.