PV PROTEC C (R) 40
PV PROTEC C 40 - dedicated surge suppressor (OPN) for solar protection system based barareyvypolnenny soedenonnogo with termorastsepitelem varistor for protection against remote atmospheric discharges, and is intended to protect the charges according to the area 1-2 standard IEC 62305. It consists of two parts of the base and plug-in module

class IEC / VDE: II / C
Fitting Position: PV system - PV, module side
Thermal:. breaker a visual warning of failure through a common indicator
Remote signaling:. Fires immediately after the failure of the varistor
module Replacement:. Yes! In case of failure, you can only replace the module insertion. The base remains on the DIN rail
PV PROTEC CR 40- the arrester module has built-in all contact group which serves to connect a remote alarm that announces the failure of the varistors

Specifications:..
In accordance with IEC-61643-1
class IEC / VDE - I, II / B, C
maximum operating voltage (AC / DC) Un.d.r - Rated 100V
discharge current (8/20) Ir - 10kA
The maximum discharge current (8/20) Imax - 40ka
The voltage at the module output at IN (8/20) - <0.4 kV
Tracking current if - no
srabativaniya time tA - <25ns
The residual current at Un.d.r. IPE - <1,55mA
Termorazmykatel - There
Torque - max. 4,5Nm
fuse (if the main> 125 A) - 125A gL
Short circuit - 25kA / 50Hz
Working temperature - -40 ° C .... + 80 ° C.
wire range - Single - 35mm2; Stranded - 25mm2
mounting indoors on DIN rail - 35 mm
Protection Class - IP 20
casing material - thermoplastic self-extinguishing class UL 94 VO
dimensions DIN 43880- 2TE
module weight - 200g
code - 501 521

for The figures for PV PROTEC CR 40
Remote signaling - there
triggering conditions - AC: 250V / 0, 5A; 125V / 3A
Wire range - max. 1.5mm2
Torque - 0,25Nm
Module weight - 210g
Code - 501 531