.. Three-row horizontal arrangement of modules
The single-bearing structure with braces
SMS-301-3-12
(three-row, single-point system with a horizontal arrangement of modules) Number of PEM in the section - 12
Number of piles - 3
galvanized steel, hardware - stainless steel, clamps - aluminum
- Optimum cost
- Drop-in installation method
- Quick and easy installation
- Full synchronization elements
- Maximum factory readiness
- Special anticorrosion measures
- Environmentally safe product

elements bearing structure made of bent steel profiles own production with corrosion-resistant coating method hot-dip galvanizing. Installing piles pillars made of precast method without concrete works. A compound of structural elements is performed on the bolts with particulate zinc Delta-MKS coating. For fixing fotoelekstricheskih modules pressing elements are used aluminum anodized and stainless steel bolts. The use of dielectric spacers excludes metal contact corrosion.

Specifications:
Materials:
bearing structures - bent profile of steel S235 GOST 27772-88 coated with zinc of at least 70 microns;
pressure elements - Anodized 6063 T66 aluminum AlMg0,7Si GOST 22233-2001 with the anode-oxide coating of at least 20 microns;
fasteners - bolts strength class not less than 5.8 carbon steel State Standard ISO 898-1: 2003 zinc-dispersive Delta-MKS coating of DSTU ISO 10683: 2009 and A2-70 stainless steel State Standard ISO 3506-1: 2006