JUTA DY1024 10A 12V / 24V charge controller with display + USB socket

Controller DY-1024 is a highly intelligent, multi-purpose controller solar charging and discharging. Integrated LCD display with a very friendly interface, flexible configuration of all parameters. Fully fit various equipment

The main difference controller DY-1024 -. A USB socket for charging mobile phones, smart phones
This controller can charge any portable devices that can be charged by USB. computer jack.

Features controller DY-1024
1. The circuit uses an industrial controller.
2. A large LCD screen.
3. All parameters are customizable.
4. Intelligent three-stage PWM charging controlled.
5. Built-in short circuit protection and break the load circuit.
6. Built-in protection against reverse discharge and recharge accumulators.
7. Current protection of the complementary pairs of MOSFET.
8. Small heating device components.
9. The degree of protection shell by IEC-60529, DIN 40050 standard - IP21

DY-controller 1024 may operate with the following types of batteries:
1. Gel.
2. Acid maintenance free (sealed).
3. Acid serviced.
4. The iron-lithium.
5. . Lithium ion

can select one of seven charging modes:
B01 - for sealed maintenance-free batteries (charge voltage absorbent 14,4 / 28.8V)
B02 - for gel batteries (charge voltage absorbent 14,2 / 28,4V)
B03 - served for the battery (the charge voltage of the absorbent 14,6 / 29,2V)
B04 - for iron-lithium batteries (four banks sequentially )
B05 - for iron-lithium batteries (5 cans sequentially)
B06 - for lithium-ion batteries (3 banks sequentially)
B07 - for lithium-ion batteries (four banks sequentially) < br />
DY-1024 controller allows to control and to set their own:
- voltage at the battery terminals;
- the float voltage;
- switching off the load voltage;
- resumption voltage supply to the load (after a failure) the power
-. load operation

specifications Controllers. EPA DY-1024
Model DY-1024
rated current 10A
12V / 24V rated voltage automatic determination
solar panel voltage ≤50V
Supportive (float) charge 13.8V / 27,6V (parameter)
load disconnection voltage (battery overdischarge protection) - LVD 10.7V / 21.4V (parameter)
resumption load connections (after protection of the battery overdischarge) - LVR 12 6B / 25.2V (parameter)
absorbent charge voltage (Boost)
b01 Sealed 14.4V / 28.8V configurable settings
b02 Gelevye14.2V / 28.4V
b03 Filler 14.6V / 29.2V
b04 iron-lithium 3.6V x 4 pcs fixed parameters
b05 iron-lithium 3.6V x 5 pieces
b06 lithium ion 4.2V x 3 pcs
b07 Lithium ion 4.2V x 4 pcs
load losses ≤10mA
charging mode PWM
Recommended wire 6 mm.kv
Operating temperature -35 ° C ~ 60 ° C < br /> dimensions 70 mm * 133 mm * 34 mm Weight 154g