Charge Controller EPSOLAR SS2024

Series controllers feature SeaStar EPSolar is complete sealing and anti-corrosion aluminum body, the presence of the battery type selection function, increased the size of terminals for connecting the cables.
IP66 protection class. SeaStar series controllers are ideal for the control of the charge from the solar panels installed on boats, boats. They are not afraid of sea water, and can be operated in a wet environment

Specifications:
- Nominal voltage of the system - 12V / 24V DC automatic selection
- The nominal power of the battery charge current. - 20 A
- Maximum battery voltage - 32 V
- voltage drop (charge) - <0.26V
- voltage drop (level) - <0.15V
- tension leveling charge - AGM (sealed) AB: 14.6V; x2 / 24V;
Acid (serviced) AB: 14.8V; x2 / 24B
- voltage saturation charge - GEL (sealed) AB: 14.2V; x2 / 24V;
AGM (sealed) AB: 14.4V; x2 / 24V; Acid (served) AB: 14.6V; x2 / 24V
- float voltage - 13.8 V; x2 / 24V
- Power re-connect the load - 12.6; x2 / 24B
tripping point during discharge - 11.1; x2 / 24B
- Overall geometric size - 137h86h48mm
- Mounting size - 127h50mm
- Connections - 10 mm2
- Weight - 0.45 kg
- Max. Own consumption - <6 mA (24 V)
- Temperature Compensation - -30 mV / ° C / 12B (25 ° C)
- Temperature range - from -35 ° C ... + 55 ° C
- Humidity - 10% ... 90% (non-condensing)
- protection class - IP66

Features controller:
· charge current control voltage
· The electronic fuse. Error when connecting equipment not withdraw from the system controller
· Pulse width modulation sequential charge current
· Automatic load connection at a charge of AB
· Temperature compensation.; a temperature sensor placed on the front panel 4
· charge mode: fast (forced) saturating equalizing supporting
· Ability to select the type of battery
· High reliability
· Fully encapsulated execution and aluminum, annodirovany housing. The terminals are protected against corrosion. Ease of use - SeaStar
fully automatic device and does not require adjustments by the user, in addition to select the type of batteries
· The accuracy of the parameters provided by the use of the microcontroller

Electronic protection:
. Disabling · Sa after the final charge voltage AB
· load switching at an unacceptably low voltage AB
· protection against reverse polarity connections SB, AB and load
· protection against short-circuit (short-circuit) to input (Sa)
· Short-circuit protection of the load
· overheat protection
· load protection at input overvoltage
· Low levels of electromagnetic radiation
· breakage protection circuit AB
· Preventing at night through the discharge AB Sa
· Electronic fuse