Charge Controller EPSOLAR MPPT TRACER-4210RN

Controllers Tracer series MPPT charge with technology (Maximum Power Point Trackin) - tracking the maximum power point are intended for stand-alone photovoltaic (PV) systems. The controller is an intelligent tracking algorithm depending on weather
fotopaneli optimum operation regime conditions finding the point at which maximum power fotopaneli. Maximum conversion efficiency of 97%. %. One advantage of this model is the selection of the type of batteries (AGM, GEL, liquid-acid), as different types have different charging curve (different voltages in the same conditions). The controller can work with any type of graphic panels, including thin-film modules

Features of the controller:.
· voltage regulation
· Automatic recognition of the day and night
· timer for 1-15 hours for use in the solar lights or control

street lighting · selection Options sealed gel batteries or acidic.
· Electronic fuse. Errors by the connected load
not withdraw from the system controller
· tracking the maximum power point of the solar module allows
maximize power generation
· 4 charge modes. Fastest (forced), saturant, supporting, leveling

· Automatic load connection when charging the battery
· Temperature compensation and charge correction mode to prolong battery life

· Tropicalization: controller card is protected by waterproof
coating (lacquer), which minimizes the deleterious effect of high humidity and insects. The terminals are protected from corrosion
· Ease of use -. Tracer MPPT fully automatic apparatus and
not require adjustments by the user
· Ability to connect external panel display MT-2 via the connector RJ45
. · parameters accuracy is achieved by using a microprocessor
· High reliability

Electronic protection:..
· Sa Disabling after the final charge voltage AB
· load switching at an unacceptably low voltage AB
· protection against reverse polarity connections SB, AB and load
· protection against short-circuit (short circuit) at the input (Sa)
· short-circuit protection of the load
· protection overheating
· load protection at input
· overvoltage lightning protection varistor
· Low levels of electromagnetic radiation
· protection continuity of the chain AB
· Preventing the discharge AB through the Security Council in the night
· Electronic fuse

specifications:
The nominal system voltage - 12V / 24V automatic selection;
The nominal power of the battery charging current - 40 A;
The nominal power of the connected load current - 40 A;
The maximum battery voltage - 32 V;
The maximum input voltage from the solar battery - 100V DC;
The maximum power of the solar module - 12V / 500W, 24V / 1000W;
The total geometric size - 242h169h91mm;
Mounting size - 180h160 mm;
Connections - 25 mm2;
Weight - 2.05 kg;
Max. Power consumption <10 mA (24B);
Grounding - negative;
compound - TTL232 / 8pin RJ45;
temperature compensation - -30 mV / ° C / 12B (25 ° C);
Operating temperature range - from -35 ° C ... + 55 ° C;
Humidity - 10% ... 90% (non-condensing);
protection class - IP30