Charge Controller EPSOLAR LS0512

EPsolar LandStar controller series is designed for stand-alone photovoltaic systems; it controls the charge and discharge of the battery. The controller optimizes the charging process by increasing the battery run-time and improving system performance. Integrated self-diagnostics and electronic protection functions to prevent damage caused by installation errors or abnormal operating conditions of the system

Features of the controller:.
· voltage regulation
· Electronic fuse. Error when connecting equipment not withdraw from the system controller
· Pulse width modulation sequential charge current
· Automatic load connection at a charge of AB
· Temperature compensation.; a temperature sensor placed on the front panel 4
· charge mode: fast (forced) saturating equalizing supporting
· Ability to select the type of battery
· High reliability
· Tropicalization: Board controller protected waterproof coating (lacquer), which minimizes the deleterious effect of high humidity and
insects. . The terminals are protected against corrosion
· Ease of use - Landstar fully automatic device and does not require adjustments by the user, in addition to selecting the type of rechargeable battery

· parameters of accuracy is achieved by using a microcontroller
<. br /> Electronic protection:
- Disabling Sa after the final charge voltage AB
· load switching at an unacceptably low voltage AB
· protection against reverse polarity connections SB, AB and load
· protection against short-circuit (short circuit) at the input (Sa)
· short-circuit protection of the load
· overheat
· load protection at input overvoltage
· Low level EMI
· protection against open circuit AB
· Prevention at night through the discharge AB Sat
· Electronic fuse

specifications:

- nominal system voltage - 12 V DC
- Nominal power battery charging current ba tarei - 5 A
- Maximum battery voltage - 16 V
- Voltage drop (charge) - <0.26V
- Voltage drop (level) - <0.15V
- Tension equalizing charge - AGM (sealed) AB: 14.6V; x2 / 24V;
Acid (serviced) AB: 14.8V; x2 / 24B
- voltage saturation charge - GEL (sealed) AB: 14.2V; x2 / 24V;
AGM (sealed) AB: 14.4V; x2 / 24V;
Acid (serviced) AB: 14.6V; x2 / 24V
- float voltage - 13.8 V; x2 / 24V
- Power re-connect the load - 12.6; x2 / 24B
tripping point during discharge - 11.1; x2 / 24B
- Overall geometric size - 97h66h25mm
- Mounting size - 86h44mm
- Connections - 2.5 mm2
- Weight - 0.05 kg
- Max. Own consumption - <6 mA (24 V)
- Temperature Compensation - -30 mV / ° C / 12B (25 ° C)
- Temperature range - from -35 ° C ... + 55 ° C
- Humidity - 10% ... 90% (non-condensing)
- protection class - IP30