Charge Controller EPSOLAR EPIPC-COM 10

EPIPC-COM series (PWM charge controllers)
controller EPIPC-COM has the ability to connection of the external digital display MT-2.
This charge controller model supports solar panels up to 270 W at a voltage of 12 V or to 550 W at a voltage of 24 V.
system voltage (12 or 24) is selected automatically by the controller on the basis of the voltage measurement are connected batteries. Voltage connected to the solar controller should be equal to the voltage of the connected battery (ie you can not, for example, to use a solar panel with a voltage of 24 V for 12 Charging the battery). This feature of all controllers PWM-type charge

Controller features:.
· Intelligent optimal control system
· Automatic selection of the operating voltage (12 / 24B)
· Selectable AB type used by the MT-2
· High charging efficiency using PWM
· temperature compensation
· Optional remote temperature sensor
· Using MOSFET as an electronic key without any mechanical switch < br /> · Ability to connect an external display MT-2 (optional)
· Indicators load condition and the battery charge
· Electronic protection: overcharge, overdischarge, short circuit, improper connection AB
< br /> Electronic protection:
· short-circuit in the solar battery and the load circuits,
· overload in the solar circuit and the load,
· connection of reverse polarity,
· reverse current at night,
· off when the voltage high . SRI,
· disabling low voltage

Specifications:
Model - EPIPC-COM 10
nominal system voltage - 12V / 24V DC automatic determination
The nominal power of the battery charging current - 10A
Max. Power consumption <6 mA
Falling voltage (charge) <0.26V
Voltage drop (level) <0.15V
Voltage equalizing charge
GEL (sealed) AB: 14.8V; x2 / 24V;
AGM (sealed) AB: 14.4V; x2 / 24V;
Acid (serviced) AB: 14.6V; x2 / 24B
saturation charge voltage - GEL (sealed) AB: 14.6V; x2 / 24V;
AGM (sealed) AB: 14.2V; x2 / 24V;
Acid (serviced) AB: 14.4V; x2 / 24V
float voltage 13.7V; x2 / 24V;
re-load voltage connection 13.2V-13.1; x2 / 24B
breaker at the discharge point 11.1; x2 / 24B
Compound 8 pin RJ-45
temperature compensation -30 mV / ° C / 12B (25 ° C)
Weight 0.24 kg
connections 4 mm2
dimensions 153h76h37 mm2
Operating temperature -25 ° C ... + 55 ° C storage temperature
-35 to +80
Humidity 10% ... 90% (non-condensing)
protection class IP30