Solar controller TNC-2

For systems with integrated tank. Analogue SR609
The main functions:
- Built-in timer;
- On Self Test;
- upper and lower limits of heat settings;
- Set the heating time;
- continuous heating;
- Rapid heating;
- Reset parameter;
- heating temperature indication values ​​

model TNC-2 controller is designed specifically to work with sealed solar water heaters.. Controller design enables easy and fast installation, as well as stability and precision in operation of the equipment. The apparatus allows to set four different time points by using upper ( «up» selection heating function of time (accuracy minute settings) to perform constant heating (may be) and lower ( «bottom») limits heating, for it is also characterized by manual heating control , leakage current protection, availabilty and failure causes, nonvolatile memory, and so on. d.
device is stylish appearance due black shiny top cover. The controller has a high quality and provides stable performance.

Basic specifications
1. power Source:. 220V AC power consumption: <5W
2 temperature measurement accuracy:. ± 2 ° C
3. temperature measuring range: 0 ° C - 99 ° C
4. Power-managed electric heating: <1500W option: 3000 W
5 leakage current: 10mA / 0.1s
Basic functions
1. On Self Test.. : beep at start indicates that the word roystvo is in the normal operating state.
2. Display water temperature: Shows the actual temperature of the water in the water tank
3.. The time is permanently displayed, the indication
4.. Setting the upper limit of heating: Installation of the upper limit of the heating temperature in the range 30 ° C - 80 ° C (which means heating automatic shutdown if working in manual mode or continuous heating at a certain temperature)
5.. Setting the lower limit of heating: Installation of the lower limit of the heating temperature in the range 30 ° C - 80 ° C (this means switch the heating when the heating is started and the constant temperature is below the predetermined level mode)
6.. Selection of the heating time ( «Timing heating»): 4 can set the timer time points with daily "setting heating time." The time can be set to the nearest minute, the temperature can be set in the range of 30 - 80 ° C. If you want to turn off the unit 1 of the selected heating time is enough to set the timer to "24:00".
temperature sensor grounding wire