Inverter Xantrex 13,5 KVA 48VDC 230VAC SW4548T-3PH

Inverter / Charger is a new generation device for continuous / self-contained power and renewable energy systems. Characteristics such as high efficiency and the ability to 2-fold starter overload makes this a truly unique inverter
The most interesting features of the XW Inverter, distinguishing it from all others:.
• The presence of 2 incoming AC power lines (urban network and generator) can be used as an inverter in the ATS (automatic transfer)
• adding energy from the battery during peak load limit increases power consumption
• interactive communication with the network allows to "stretch" the energy from alternative sources to the network in a mode on-line (without disconnecting from the network)
• can be connected to a computer via a network bridge or wireless, as well as configured for remote monitoring via the Internet in the presence of GSM-modem
• automatically controls the switch / off of the generator for charging the battery, allowing the battery charging and from the network and from the generator (in the absence of an external network)

AC input voltage (rated l) 230
range AC input voltage (default) 150-288 In
AC input current 30 A, the passing mode
45 A during charging
Continuous Power (25 ° C) 4000 VA
efficiency (peak value) of 94%
output AC voltage (RMS) 230 B
nappryazheniya output regulation range ± 5%
AC frequency 50 Hz denomination ± 0,04% quartz.
Constant AC output. current (25 ° C) 19 A
peak AC output. Current (100 ms) A 38
Total harmonic distortion O. voltage <5%
The relay automatic transmission current of 30 A
The input voltage for the post. current (nominal) 24 B
input voltage range of the post. In current 22-32
DC rated power of 180 A
electrical short-circuit current of 360 A
load current (full voltage) <20 W
power consumption in the search mode < 1 Wt
protection against battery discharge adjustable opening and closing of the battery when it is discharged, charging
Max. continuous charging current of 150 A
Form output voltage sine wave, from 34 to 52 steps per cycle
load search range (during operation of the inverter) adjustable from 0 to more than 200 watts (48 watts - the default)