Phoenix Inverter Victron Compact С24/2000VA

High-quality sine inverters Phoenix Inverter Compact, Phoenix Inverter designed with professional use and meet the highest requirements. This series of inverters has no built-in charger. Inventors have VE.Bus data bus and allow operation in three-phase and parallel configurations. Power range from 1200VA to 5000VA allows the use of inverters in a wide range of applications.

The lineup
Phoenix Inverter Compact 12/1200
Phoenix Inverter Compact 12/1600
Phoenix Inverter Compact 12/2000
Phoenix Inverter 12/3000

Phoenix Inverter Compact 24/1200
Phoenix Inverter Compact 24/1600
Phoenix Inverter Compact 24/2000
Phoenix Inverter 24/3000
Phoenix Inverter 24/5000

Phoenix Inverter 48/3000
Phoenix Inverter 48/5000

The technology "SinusMax" < br />
criteria when designing inverters were to obtain a product with a pure sine wave output voltage and optimum efficiency, but without compromising performance. Using hybrid RF technology, high quality product is obtained with a compact size, light weight and capable without any problem to feed any load.

Run "heavy load"

unique technology «SinusMax» provides launch loads with large inrush currents, whereas conventional RF characteristics do not provide such technologies. Inverters are ideal for nutrition "heavy" loads such as refrigeration compressors, motors and similar devices.

three-phase configuration and parallel

Increasing the power system under development possible through parallel switching (up 6 inverters per phase), for example, six inverters Phoenix inverter 24/5000, connected in parallel, can provide 24kW / 30kVA output power. Also operation and 3-phase configuration.

Two power saving mode

The load search mode, the idle current of the inverter is reduced to 70% of the rated current. In this mode, the inverter is turned off and every two seconds for a short period of time to determine the load. In AES mode (saving) the idle current is reduced to 20% of the rated current (inverter runs constantly). AES mode can be set only by using the software VEConfigure.

Programmable Relay

By default, the programmable relay is set as an alarm relay, ie the relay will be triggered in the event of an alarm or pre-alarm (overheating, ripple DC input is too high, the battery voltage is too low). Not programmed via DIP-switches.

The configuration of the inverter

All models have VE.Bus data bus (connector RJ45) to connect the inverter to the PC. This will require a RJ45 UTP cable and interface MK2-USB (interface also provides galvanic isolation between the inverter and the PC). With the help of free software VEConfigure possible to configure all programmable parameters of the inverter. Several settings can be changed using DIP-switches (see. User Manual).

Applications

inverters are ideal for use in all vehicles requiring an AC voltage source 230 onboard (ambulances, motor homes, mobile offices, boats and yachts), as well as for stand-alone power supply systems with the use of alternative energy sources (solar power).