Inverter Xantrex XW6048 6,0KVA 48VDC

Hybrid inverter / charger device XW series - a device with an output voltage of sinusoidal waveform, intended for use both in the home and in industry. The device can be used in the following systems:
- autonomous power supply system;
- the power supply system to support peak network loads. It is used in cases of established limit consumed power limit, e.g. FFW installed. So you can eat, for example, 12 kW, while your PSS transmits only 5 kW;
- supply system with energy storage in batteries; Possible to implement the sale of excess energy generated from alternative energy sources to the network;.
- continuous system or backup power
possible to install a joint three inverters for use in a single-phase 230 V system and a total capacity of 18 kW . It is also possible to connect several devices to create a three-phase system. For one phase requires at least one transmitter, and in each phase to the possible parallel connection of two inverters.
inverter / charger series XW is able to operate with generators and renewable energy sources, providing continuous or backup power.
Additional unit automatic start XW generator monitors the battery voltage and starts or stops the oscillator also drives the generator to aid device system.
Hybrid inverter / charger can be used as an uninterruptible power supply.
Due to the large output and DC charging multistage battery charging time is minimized.
to run heavy loads (pumps, refrigerators, AC compressors) using increased peak power.
inverter / charger can overcome congestion, more than twice the power rating of the inverter with a minimum fall output tense . Ia

Specifications:

inverter output AC:
Output power (continuous) at T 25 ° C - 6800 W
Overload 30 min / 60 sec @ 25 ° C - 8,500 W / 12000 W
output power (continuous) at T = 40 ° C - 6000 W
maximum output current of 60 seconds (RMS) - 53 A
output frequency (optional) - 50/60 Hz
output voltage - 230 Vac
total harmonic distortion (THD) at rated power - <5%
power consumption - <7 W
Input DC voltage range - 40 to 64 V (50.4 V nominal)
input direct current at nominal capacity - 150 A

DC charger output
maximum output current charge - 140 A
range of output voltage of the charge - 40 - 64 V (48 V)
charging control - three stages, two stages, increasing configurable
charge temperature compensation - battery temperature sensors included < br /> charging power factor - 0,98
Compatible t Battery Types - ServicedAccount, Gel, AGM, LiON
Connectable battery system - from 440 to 10000 Ah

AC input
AC 1 (Network) input current (selected limit) - 3 - 60 A (56 A default)
AC 2 (generator) input current (selected limit) - 3 - 60 A (56 A default)
Automatic transmission rating / relay Typical transmission - 60 A / 8 ms
AC input voltage nominal - 230 V +/- 3%
AC input frequency range (bypass / charging mode) - 45-55 Hz (default) 40-68 Hz (allowable) < br />
AC output AC:
maximum power - 6,0 kVA
current range - from 0 to 27 A
voltage range - from 205 to 262 Vrms
The range of frequencies - from 48 to 51 Hz

efficiency:
Peak efficiency - 95.7%

General specifications:
device number - 865-8548-61
weight - 55.2 kg / 76.7 kg
Dimensions (H x W x D) - 58 x 41 x 23 cm
dimensions in packaging (H x W x D) - 71.1 x 57.2 x 39.4 cm
IP protection level - IP20
Operating air temperature -25 ° C to 70 ° C
Guarantee (dependent on the country) - from 2 to 5 years

Advantages:
Monitoring systems and networks - Available
Smart features - relief to the network, the increase in input power, generator support, prioritize the consumption of the battery or network
additional port - 0 to 12 V, maximum 250 mA DC output selectable triggers
Off-grid AC coupling - frequency regulation
Operating multiple devices - Alternating: up to four parallel phase: up to 12 units in the configuration multi- cluster with external AC contractor

The regulatory framework Council of Europe in accordance with the following EU directives and standards:
EMC directive - EN61000-6-1, EN61000-6-3, EN61000-3- 2
low voltage Directive - EN50178
Safety - IEC 62109-1, IEC 62109-2
RCM marked and compliant - A S 4777.2, AS 4777.3