Іnvertor CONEXT SW4048-230

Hybrid inverter Conext SW - is the new average power inverter sine functions with an uninterruptible power supply and battery charger for an uninterruptible power system or standalone

Conext SW -. This inverter / charger with a pure sine wave, which can be used for stand-alone power systems, backup power systems and solar panels. Inverter / Chargers Conext SW designed to work with a wide range of types of generators are able in a short time to work in parallel with the generator to facilitate its start in the presence of a heavy load. Conext SW - an electronic device that combines an inverter, multi-stage charger for batteries and switch to transfer to another chain without breaking the power

The key features Conext SW are:
Pure sine wave. exit - Conext SW as a pure sine wave outputs of the inverter for your microwave devices, electronic entertainment systems, computer and other types of load;
receiving power identical to the characteristics of the AC power that provided by power supply network (of the electricity supplier);
Some of the advantages of electricity with high pure sine wave are the correct operation of the microwave oven, working with sensitive load (e.g., television, rheostats for regulating light and variable speed devices)
Multi model application - inverter / charger Conext SW. It built on a universal platform, making it possible to work with . Multiblock parallel configuration to increase the power level devices
Most starting power - Inverter / Conext SW charger has great starter output, which is two times greater than its maximum operating output power required to run such a complex load as a submersible pumps, refrigerators or conditioners
power factor correction -. with input power factor correction (PFC) minimizes the input alternating current required for charging, a positive effect on the ability of ac transmission
Multistage charging -. inverter / charger Conext SW has high possibility, multistage charging, thereby reducing the time this process
Adjustable frequency -. inverter / Conext SW charger is capable of operating from power supplies 50Hz and 60Hz due to the spreading frequency AC
responds to. cooling veins temperature change tilyatory variable speed - the fans are switched when the internal temperature reaches 45 ° C and at 70 ° C reaches a maximum rotational speed. Ventilators fall off when the internal temperature to 40 ° C
Operation Xanbus -. Inverter / Conext SW charger also allows working with Xanbus network, which means the possibility of combining into a network and communicate with other devices operating in the network Xanbus.

In Conext SW package includes:
Hybrid Inverter Conext SW;
One set of documentation comprised of the user manual and installation manual;
One battery temperature sensor ( BTS);
Two network terminators (stub) Xanbus;
Two sets of nuts 5/16 "-18 and washers for DC terminals;
Two covers for the DC terminals (red and black ) with two sets of screws;
one mounting bracket with one set of mounting nuts M6 (not shown)

specifications:
Model: SW4048
Marking: 865. -4048-61
Nominal power 3.5 kW power
30 min .: 4
kW Maximum power 5 kW .: 7
Peak current 42 a
output frequency: 50/60 Hz
output voltage: 230 V
output form: Pure sine
Efficiency: 92%
consumption: <8W
input range voltage from battery 40 - 64 In
maximum charge current: 45 A Charger 3-stage
Temperature Compensation: Yes Maximum input
alternating current: 14 A
Input Voltage Range: 170 - 270
charge "dead" battery Yes
battery type: FLA / AGM / GEL / CUSTOM
relays switching time: 16.7 ms
Maximum relay current: 30 A
Operating temperature: -20 ... + 60 ° C
storage temperature: -40 ... +85 ° C
inverter Weight: 28,1 kg
Weight: 35 kg Size
inverter 38, 7 x 34,3 x 19,7 cm
package dimensions: 46 x 44 x 32 cm
Warranty: 2 years