Quantity
|
Out of stock
|
||
|
Laboratory power source IRPS 3 ... 15V / 20A for the power in the stationary conditions of various electronic equipment and other power consumers
basic specifications and characteristics:.
typical measured output voltage ripple a voltage regulation mode mV effective value of not more than 50
emission maximum output voltage when load shedding Imax from 0.9 to 0 in the mode of voltage regulation, Uout% of the effective value not more than 2
Efficiency unit at maximum power output is not less than 0.85
nominal value voltage mains AC 220
working range voltage AC supply mains, 187 ... 242 < br />
valid range mains voltage alternating current, 180 ... 250
setting range of the output voltage, V 3 ... 15
setting range of the maximum output current, A 1 ... 20
instability of the output voltage when the mains voltage change over the operating range and the load current Imax 0.9%, not more than 1
Instability of output voltage with the change load current from 0 to 0.9 Imax at nominal line voltage,%, no more than 1
temperature drift of output voltage in the constant voltage mode,% C, not more than 0,02
< br /> human class method of protection against electric shock 01
class degree of protection IP20 housing electrical equipment
E ektricheskaya insulation strength between the contacts closed and the power cord of the device housing between the closed and the output terminals of the device body, and between the closed contacts closed cord and the output terminals of the device can withstand without breakdown test voltage, the effective value of 1000
unit dimensions (WXHXD) mm 150h95h175
Weight, kg, not more than 1.3
In devices overload protection and short circuit protection is carried out automatically by the transition from the stabilization mode voltage into a current limiting mode and vice versa
Parameters of:. IRPS Adjustable power supply input
U - 220 V
U minimum output -3 V
U maximum output - 15 V
I output - 20 A
connectivity battery - no
Design Steel casing - table