Inverter Pulse IPI- 48V/220V-1,0kVA-50Hz

Inverter Pulse IPI- 48V / 1,0kVA

1 Purpose

1.1 DC voltage converter 48V PN 48V / 220V 50Hz 1,0kVA (hereinafter - the converter) designed to supply receivers electric power to the power consumption to 1000VA single phase 220V 50Hz AC
1.2 converter is designed for continuous clock work indoors under the following environmental conditions:.
- ambient temperature from 0C to + 40C;
- relative humidity to 95% at a temperature of + 25C

2 basic specifications and characteristics

2.1 Standard value DC supply voltage 48V
2.2.. operating voltage range of the DC power supply (46 ... 62) In.
2.3 Permitted voltage DC power range (42 ... 64) In.
2.4 Standard value AC output voltage (220 2) B.
2.5 nominal value of the frequency of the output . Voltage (50 1) Hz
2.6 Nominal value of the total load power 1000VA
2.7 Operating range of load power of from 0 to 100% of nominal load
2.8 Type -.. Active, active-inductive ., the active capacitance, nonlinear (rectifier filter)
2.9 Operating range of load power factor (0.7 ... 1)
2.10 overload power factor of 1.7:. 1 during 5c ​​2.11 ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%.
2.12 The current consumed by the converter at nominal input voltage and full load power, not more than 24A.
2.13 converter has a protection from overload and short circuit across the load reduced from a high voltage power supply polarity voltage supply connection and also from overheating.
2.14 Automatic disconnection occurs at a converter output voltage electron ropitaniya of range. Automatic activation of the transducer occurs when returning power within the operating range.
2.15 Dielectric strength between the closed and the input terminals of the converter housing between the closed and the output terminals of the converter housing, and between the closed inlet and outlet closed transducer terminals, not less than 1000 V AC 50 Hz (effective value) for 1min.
2.16 Efficiency converter at nominal input voltage and full load power at least
0.88 2.17 Cooling method -. forced ventilation with temperature control of the air supply
2.18 Dimensions converter (Wxhxd, without protrusions) 255x85x190mm. .
2.19 converter Weight, 4,0kg.