Inverter Pulse IPI- 48V/220V-0,5kVA-50Hz

Inverter Pulse IPI- 48V-0,5kVA

1 Purpose

1.1 Voltage converter 48V DC IPI 48V / 220V 0,5kVA.50Hz (hereinafter - the converter) designed to supply power receivers with a power consumption of up to 500VA (TV, computer, audio-visual equipment, food processor, etc.) single-phase 220V AC 50Hz
1.2 converter is designed for continuous work around the clock in closed rooms under the following climatic conditions.:
- ambient temperature from 0C to + 40C;
- relative humidity to 95% at a temperature of + 25C

2 basic specifications and characteristics
<. br />2.1 nominal value voltage 48V DC power.
2.2 Working voltage DC power range (46.0 ... 56.0) In.
2.3 Permitted voltage DC power range (42.0 ... 58.0) In.
2.4 Rated output voltage I AC (220 2).
2.5 nominal value of the output voltage frequency (50 1) Hz.
2.6 Nominal value of the total load power 500VA.
2.7 Work load power range from 0 to 100 .% of the nominal load
2.8 Type -. active, active-inductive, capacitive, active-nonlinear (rectifier filter)
2.9 Operating range of load power factor 0.7 ... 1
. 2.10 overload power factor of 1.7:. 1 during 5c ​​
2.11 ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%
2.12 The current consumed by the converter at rated input voltage. and full-load power, not more than 13A.
2.13 power supply voltage at which the automatic shutdown of the inverter 42,0V.
2.14 power supply voltage at which the switch converter 46,0V.
2.15 converter has s Protection against overloads and short-circuits at the load, from the reduced power supply voltage, reverse polarity voltage supply connection, and from overheating.
2.16 Dielectric strength between the closed and the input terminals of the instrument housing, output terminals and closed device housing, and closed between the input and output terminals closed, not less than 1000 V effective value.
2.17 Efficiency converter at nominal input voltage and full power of the load, at least
0.85 2.18 Cooling method -. forced ventilation with temperature control of the air supply
2.19 Dimensions converter (Wxhxd, without protrusions) 150x85x280mm. .
2.20 mass transducer, not more than 2.5 kg.