InverterPulse IPI-110V/220V-1,0kVA-425Hz

Input voltage: 110V
Output voltage: 220V
voltage frequency: 425Hz
Power: 1.5kVA

Purpose:
- voltage converter (hereinafter - inverter) IPI 110V / 220V 1,5kVA 425Hz for 220V AC electrical energy consumers, 425Gts (including electric motors, lighting systems of railway vehicles, etc.) from the DC voltage source 110B
-. Capable of continuous clock work indoors under the following environmental conditions:
- ambient temperature from 0C to + 40C;
- relative humidity to 95% at a temperature of + 25C

. Main technical characteristics:

- Rated value DC power voltage 110v
- Working voltage range of the DC power supply (88 ... 150) In
- valid range power supply voltage.. DC (82 ... 1 53) In
-. Nominal AC output voltage value (220) In
-. The nominal value of the output voltage frequency (425) Hz
-. The nominal value of the total load power 1500VA
- Working range from 0 to 100% of the load capacity of the nominal value
-. load Type - active, active-inductive, capacitive-active, non-linear (with the filter rectifier) ​​
-. The operating range of load power factor . 0.7 ... 1
- overload power factor 1.5:. 1 during 5c ​​
- ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%
-. The current consumed by the converter at nominal mains voltage and full load power, not more than 16A
-. The converter has an overload protection and short circuit across the load reduced from a high voltage power supply polarity voltage supply connection, and from the lane egreva
-. Automatic shutdown occurs when the transducer output voltage for the power range. Automatic activation of the transducer occurs when returning to power supply voltage operating range
-. Dielectric strength between the closed and the input terminals of the converter housing between the closed and the output terminals of the converter housing, and between the closed and the input terminals of the inverter outlet closed, can withstand without breakdown 1000V test voltage (effective value)
-. Efficiency converter at nominal input voltage and full load power, at least 0.88
-. Cooling method - forced ventilation with temperature control of the air supply
-. Dimensions converter (Wxhxd) 345x95x240mm
. - converter Weight, 5,0kg
.