Inverter Pulse IPI-110V/220V-0,5kVA-50Hz

1 Purpose

1.1 AC voltage converter 1100V 50Hz in the AC voltage of 220V 50Hz IPI.220V 50Hz / 110V 50Hz 0,3kVA. (Hereinafter - converter) is designed to supply electricity to the power consumption of the receivers to . 300VA single-phase AC voltage of 110V 50Hz
1.2 converter is designed for continuous clock work indoors under the following environmental conditions:
- environment temperature from 0C to + 40C;
- relative humidity to 95% at a temperature of + 25C.

2 basic specifications and characteristics

2.1 Standard value mains voltage 220V AC.
2.2 Operating voltage range feed AC (180 ... 260) In.
2.3 valid range voltage AC power supply network (170 ... 265) In.
2.4 Standard value AC output voltage (110 2).
2.5 Rated ... Noe frequency value of the output voltage (50 1) Hz
2.6 Nominal value 300VA
2.7 Operating range of load power total power load from 0 to 100% of nominal load
2.8 Type - active ., an active-inductive, capacitive, active-nonlinear (rectifier filter)
2.9 Operating range of load power factor 0.7 ... 1
2.10 overload power factor of 1.7:. 1 for 5c.
2.11 ratio distortion sinusoidal output voltage at rated power active load, not exceeding 10%.
2.12 The current consumed by the converter at nominal values ​​of supply voltage and load power, not more than 1,8A.
2.13 converter has an overload protection and short-circuit of the load from a reduced supply voltage, and from overheating.
2.14 Automatic disconnection occurs at a converter output voltage value of the AC power of range. Automatic activation of the transducer occurs when returning the mains voltage in the operating range
2.15 According to the method of protection against electric shock, the device 01 corresponds to the class, and the degree of protection of the electric equipment housing -. Class IP20
2.16 Dielectric strength. closed between the input terminals and the housing of the device, between the closed and the output terminals of the device housing between closed and the input terminals and output terminals of the closed device can withstand without breakdown test voltage of 1000 V effective value.
2.17 Efficiency converter at nominal input voltage and load power, not less than 0.85
2.18 Cooling method -. forced ventilation with temperature control of the air supply
2.19 Dimensions converter (Wxhxd, without protrusions) 305x95x240mm.. Design - desktop
2.20 converter Weight, 5,5kg
.