Inverter Conext XW+8548E (6,0 KW 48V)

Inverter / Charger is a new generation device for continuous / self-contained power and renewable energy systems. Schneider launches Hybrid Inverter / Charger new generation Conext XW +. This inverter will be the heart of the new system XW + power up to 18 kW, designed for smooth or autonomous power supply of residential and commercial buildings. Model Conext XW + includes high-quality sinusoidal DC-DC converter, powerful charger, and the transfer switch pereklyucheniya.Dlya ensure regular or backup power inverter Conext XW + is able to work in standalone mode and in the automatic interaction with the city network. K inverter Conext XW + may also be directly connected to the generator and alternative sources of renewable energy. System Conext XW + allows the power capacity of 18 kW to 1-phase or 3-phase mode. Designed to meet the experts' recommendations, the inverter Conext XW + sets new standards for quality, reliability and ease of operation. The Hybrid Inverter Conext XW + have been used the latest developments and the components of the structure. Design and construction of the inverter can simplify and speed up the installation of the entire system. Characteristics such as high efficiency and the ability to 2-fold starter overload makes the inverter is truly unique. None of the other inverter / chargers can not match the XW + neither in performance nor in appearance

The most interesting feature of the inverter XW +, distinguishing it from all others:.
- the presence of 2 -x incoming AC lines (local and network generator) can be used as an inverter in the ATS (automatic transfer)
- addition of energy increases the battery power consumption limit peak loads
- interactive communication with the network allows " stretch "energy from alternative sources to the network mode on-line (without disconnecting from the network)
- can be connected to a computer via a network bridge or wireless, and is configured for remote monitoring via the Internet in the presence of GSM-modem
- automatically controls on / off of the generator for charging the battery, allowing the battery charging and from the network and from the generator (in the absence of an external network)

Advantages:
- Power to 6, 0 kW peak power - up to 12.0 kW (60 c) and 8.5 kW (30 min)
- Coupling of 3 inverters (network cable, 3F6 or 1F18 kW kW)
- Pure Sine, quiet operation
- 2 incoming lines of "city" and "generator" with automatic
- Automatic backup generator startup (XW-AGS optional)
- support network mode "add" up to 18 kW peak loads
- Setting time periods of network support, charge the battery and the generator
- mode "add" (mixing) of the alternative energy source for saving or exporting
- Powerful charger - programmable from 1 to 140 a (48 =)
- Predefined parameters charge any type of battery:. Gel, AGM, LiON, manually
- three- or two-step charge algorithm battery with programming parameters
- precise digital readout parameters
system operation - This graphic display scale battery charge and consumption power of the load
- Audible battery discharge signal and crash reports
- Programmable AUX pin 12 V, 250 mA
- Integrated bypass inverter / charger
- Ability to connect to a PC for monitoring and programming

Technical specifications:
device short name - XW + 8548 E
inverter output AC:
output power (continuous) at T 25 ° C - 6800 W
Overload 30 min / 60 sec at T 25 ° C - 8,500 W / 12000 W
output power (continuous) at T = 40 ° C - 6000 W
maximum output current of 60 seconds (RMS) - 53 A
output frequency (optionally ) - 50/60 Hz
output voltage - 230 Vac
total harmonic distortion (THD) at rated power - <5%
power consumption - <7 W
Log range DC voltage - 40 to 64 V (50.4 V nominal)
input direct current at nominal capacity - 150 A

DC charger output
maximum output charge current - 140 A
range of output voltage of the charge - 40 - 64 V (48 V)
charging control - three stages, two stages, increasing configurable
charge temperature compensation - battery temperature sensors included
charging power ratio - 0,98
Compatible battery types - ServicedAccount, Gel, AGM, LiON
Connectable battery system - from 440 to 10000 Ah

AC input
AC 1 (network) input current (selected limit) - 3 - 60 A (56 A default)
AC 2 (generator) input current (selected limit) - 3 - 60 A (56 A default)
Automatic transmission rating / relay Typical transmission - 60 A / 8 ms
AC input voltage nominal - 230 V +/- 3%
AC input frequency range (bypass / charging mode) - 45-55 Hz (default) 40-68 Hz (allowable )

AC output AC:
maximum power - 6,0 kVA
current range - from 0 to 27 A
voltage range - from 205 to 262 Vrms
The range of frequencies - from 48 to 51 Hz

effektivnos be:
Peak efficiency - 95,7%

General specifications:
The device number - 865-8548-61
Weight - 55.2 kg / 76.7 kg
Dimensions (H x W x D) - 58 x 41 x 23 cm
dimensions in packaging (H x W x D) - 71.1 x 57.2 x 39.4 cm
IP protection level - IP20
working air temperature range -25 ° C to 70 ° C
Guarantee (dependent on the country) - from 2 to 5 years

Additional characteristics:
Monitoring systems and networks communication - Available
Smart features - relief to the network, the increase in input power, generator support, prioritize the consumption of the battery or network
additional port - 0 to 12 V, maximum 250 mA DC output, selectable triggers
Off-grid AC coupling - frequency regulation
multi-unit Operation - Single phase: up to four devices in parallel, three-phase: up to 12 units in the configuration of the multi-cluster with the external network contractor AC

The regulatory framework CE in accordance with trace blowing EU directives and standards:
EMC directive - EN61000-6-1, EN61000-6-3, EN61000-3-2
Low Voltage Directive - EN50178
Safety - IEC 62109-1 , IEC 62109-2
RCM marked and compliant - AS 4777.2, AS 4777.3