Gas Generator Generac RG2724MNAX (21,6kWА)

backup power generators, gas engine with water cooled

The kit includes:.
• EvolutionTM digital controller with two-line LCD display and the display of information in three languages ​​
• Isochronous electronic controller..
• damping cap.
• closed system with the regeneration cooler.
• intelligent battery charger.
• Ozone / protected from UV radiation hoses.
• voltage regulation ± 1%.
• Works on natural gas or liquid propane.
• The limited warranty for 3 years.


PROPERTIES innovative engineering and testing of prototypes are the key ingredients for success GENERAC in "increased power due to the design." But this we do not stop. Focus on the testing of components, reliability testing, testing on the effects of external factors, tests of strength and durability combined with a check for compliance with CSA, NEMA, EGSA, and other standards allows you to choose GENERAC POWER SYSTEMS with full confidence in the fact that these systems have excellent characteristics.
CONTROL VOLTAGE SEMICONDUCTOR WITH FREQUENCY CORRECTION. This modern system of power increase adjustment standard is used in all models of Generac. The system ensures optimized fast response to changing load conditions and maximum starting an engine using an electronic selection of a torque load to the engine. Digital adjustment of the voltage in increments of ± 1%.
CENTRAL PROVISION extensive dealer network Generac provides spare parts, service and technology to all devices - from the engine and to the smallest electronic components.
transfer switch GENERAC. Durability and reliability - are synonymous GENERAC POWER SYSTEMS. The secret of this success is that in order to ensure full compatibility GENERAC product line includes sistemypereklyucheniya and management of its own production.

SPECIFICATION GENERATOR

synchronous type rotor Class insulation H
stator insulation Class H
wired communication interference ratio (TIF) <50
Single-phase wire terminals of the alternator 4
wire three phase terminals of the alternator 4
bearing seal
compound Floppy
Direct excitation system
VOLTAGE ADJUSTMENT
Type E
single phase measurement system
adjustment ± 1%
SPECIFICATION REGULATOR

type electronic frequency adjustment Isochronous
adjustment in a stabilized mode ± 0.25%
ELECTRICAL sYSTEM
alternator for charging the battery 12, 30A
stationary battery charger 2 A
Recommended battery group 26, 525CCA
system voltage of 12 volts
PROPERTIES gENERATOR
Rotatable high performance excitation generator directly connected to the engine w
Operating temperature increase calculated at 120 ° C above the ambient temperature of 40 ° C
Insulation Class H, designed for temperature increase to 150 ° C above the ambient temperature of 25 ° C
For all models A complete prototype testing.

hOUSING PROPERTIES Aluminum casing that protects against weathering. It provides protection from external environmental influences. Textured epoxy coating for added durability deposited electrostatically.
Integrated muffler critical noise. Quite critical noise silencer mounted in the device in order to avoid injuries.
Small, compact and pleasant to look at. Provides easy installation and aesthetic appearance.
SAE. Damping cap provides quiet operation of the device.
SPECIFICATION ENGINE
Manufacturer Generac
Linear Model

Cylinders 4 Displacement (liters) 2,4
Bore ( mm) 86,5
stroke length (mm) 3,94
compression ratio 9.5: 1
air intake system without pressurization
type hydraulic tappet
sYSTEM ENGINE LUBRICATION
lubricant pump type gear
full flow type oil filter spin-chuck housing
capacity (liter) 3,8
ENGINE COOLING
Type Indoor
Water pump With belt-driven
fan speed (rev / min) 1650
fan diameter - (mm) 450,9
fan operation mode
Pressure FUEL SYSTEM
fuel type natural gas, propane pair
Carburetor Downward thrust
secondary fuel regulator Standard
solenoid fuel supply stop Standard
Tools fuel pressure 9-26 mm Hg. Art. water column
All characteristics correspond BS5514 standards, ISO3046, ISO8528, SAE J1349 and DIN6271
VOLTAGE OUTPUT GENERATOR / KVA - 50 Hz
Rated voltage, 110/220
Rated Power , 21.6 kVA
Rated current, A 98
wire size (both) 125
fuel consumption, load 50% 5.60 m3 / 8.1 l / h flow
fuel load 100% 10.2 m3 / 14.8 l / h
ENGINE COOLING
air flow (air inlet including air generator and combustion air into the cube. mm per minute) 2000
volume of the liquid cooling system (l) 9,5
heat removal coolant (MJ / h) 105,5
radiator Maximum operating temperature (° C) 60
Maximum ambient temperature (° C) 50
REQUIRED VOLUMES fOR COMBUSTION AIR
at rated power consumption (cc. per minute mm) 1,6
NOISE
sound output in dB (a) at a distance of 7 m with standards. workload generator 61

EXHAUST Exhaust Gas Flow nominal capacity (cc. per minute mm) 3,1
exhaust temperature on the outlet pipe of the muffler (° C) 474
ENGINE PARAMETERS
nominal amount synchronous rpm 1500
Weight 426
Dimensions (L x W x H) mm. 1580h776h980