Quantity
|
Out of stock
|
||
|
Outdoor heaters are designed for a large amount of large consumers of hot water. Installed on the floor back rooms of single-family homes, family fairing and small manufacturing enterprises with large consumption of hot water.
The combination of different energy sources, opportunities to install additional thermostat and heater sleeve available for recycling and provide complete control thermomanometer and optimizing the water heating process. They are designed for operation in the combined mode of the solar collector, a heat pump or another alternative heat source
Features:.
Models of 125 to 500l are made with a metal casing and are insulated from HCFC-free direct injection foam;
models from 700 to 1000 liters have insulation of expanded polyurethane foam of a thickness of 100mm and a casing made of synthetic material wear INOX color;
Thermomanometer;
sensory couplings exchanger;
Special coupling for mounting the sub-heater;
models from 750 to 1000 liters fitted with an additional pressure regulator
Features:
Stainless steel tank of acid resistant stainless steel type AISI 316L.. The coils are made of corrugated stainless steel tubes, providing efficiency 15% higher than smooth
All models can be manufactured with a built-in electronic control, further reducing power consumption by 30%;.
Models of 150 to 500l can be made . a soft plastic housing
Main characteristics:
Type vodonagrevatelyaBoyler
volume water reservoirs 750.0 (l)
teplobm inner area. (Lower / upper) 2.08 sq.m.
Made in Bulgaria method
The indirect heating method for the installation of outdoor