Number of wires - one
Material - Copper
Class - Stranded
Insulation Material - PVC plasticized
insulation resistance (Mohm / km), 20 C - 7
cores, (Mom \ km) - 0.547

dimensions:
D cable (mm) - 12.5
cross section (mm2) - 35
Weight (kg / km ) - 378
copper Weight (kg / km) - 311.5

Application copper wire PV3 35:
power wire PV3 applied in lighting and in electrical power networks a nominal AC voltage of 450 volts in electric rated voltage of 450-700 volts corresponds to parameters of the frequency of 400 Hz. At a constant voltage - 1000 VAC. The cable is often used for mounting electrical machines and machine tools, electric installations and convectors, voltage stabilizers, lamps and lighting equipment fixed, since the wire sufficiently flexible and easily tolerate various bends. The cable is resistant to vibration loads, acoustic noise, linear acceleration and mechanical damage. PV3- is designed for fixed installation. This wire is also used in assembling electrical circuits. Place gaskets are usually: special trays, sleeves, metal, cable channels, corrugated, metal, PVC, plastic and industrial pipes, blocks and beams of building structures, mezzanine, hollow channels. Laying can be in bundles and single. Strong tensile and strong mechanical stresses during operation are contraindicated. Laying in the soil requires protection: technical polyethylene pipes or double corrugated. Installation outdoors is not recommended by the manufacturer to the properties of the power cable - not resistant to the active spectrum of destructive sunlight and severe frosts. The best place gaskets - under plaster or in different pipes.

Perform PV3 35:
force in the flexible cable type design PV3 represented by the conductors and the insulation layer. I lived in the cable 25 * PV3 - stranded conductor made of copper. Flexibility class 2, 3 or 4 for the cross sections of 0.5 to 1.5 mm2 incl., class 4 for cross sections from 2.5 mm2 to 4 incl., class 3 for the cross sections of 6 mm2. The insulation material protrudes polyvinylchloride plastic. Current-carrying conductor fits into the insulation layer. In this case, if necessary, it can be easily separated from it. The insulating layer has the property of flame retardant and does not change its properties when exposed to moisture and mold. Isolation not crack, even if the temperature is 150 C, and not be stretched at a temperature of about 70 C. Isolation of PVC-plastic compound can be of different colors - on the choice of the manufacturer. It is mandatory labeled embossing, printing, stamps on the surface. A marking is also used as a distinctive stripes or colored lines.

Characteristics wires PV3 35:
operating temperature of the wire from -50 ° C to + 70 ° C. The cable is protected from exposure to fungi and because of its flexibility - resistant to various bends. the maximum heating temperature is + cores 70 ° C. Bend radius during installation should be less than 5 wire diameters. Service life is 15 years. Resistant to relative humidity at + 35 ° C ...... 100%. Flame retardant.