Charger Aida-5s

Charger AIDA-5s - desulfatiruyuschee automatic impulse charger for battery 4-75A * h with a buffer storage mode: for Moto, sonar, and passenger / Mobile - one of the best devices produced by us: AIDA-30, AIDA-20s, AIDA -11 AIDA-10s, AIDA-6m AIDA-8super.

Charges automatically effect desulfation acid, gel batteries and alkaline capacity from 4 to 75Achas stabilized current 1A or 5A algorithm cyclic pulsed charge:

1A for batteries of 4 to 32 a * h - bikes, depth finders, passenger cars

5 a battery for 20 to 75 a * h - cars and / mobiles

PURPOSE
1.1. The charger (charger) "AIDA-5s» represents the impulse charger new generation and serves for the cyclic pulsed charge automatically 12B unattended and maintained batteries (battery) capacity of 4 to 75 A • h 1A or 5A current for desulfation zasulfatirovannyh battery for long-term maintenance battery in a charged state, to protect them from sulfation iperezaryada, as well as to store the battery in mezhekspluatatsionny period.
1.2. LU "AIDA-5s» capable to charge the battery, until discharged almost 0V, "resuscitating" short pulses of current of 1A or 5A.
1.3. LU "AIDA-5s" can be used as part of the backup systems of uninterruptible power supply, diesel generators (mode "safe storage of the battery") as well as power supply 13V 4A.
1.4. LU "AIDA-5s» has a thermal protection against overloads, protection against short circuits and overvoltage. Reverse polarity protected memory fuse

SPECIFICATION
voltage:. ~ 50Hz 150 / 240V
Power consumption: not more than 150VA
average charge current 1A or 5A
switching voltage not lower 14,8V ± 0,2V
off voltage is not higher than ± 15,5V 0,4V
supply voltage storage / block mode 13,6V ± 0,2V
current mode storage / supply unit 5A
dimensions: 95 x 65 x 170mm
Mass: not more than 0,55kg

applying the algorithm of the cyclic pulsed charge to effect desulfation protecting the battery charge on the end of the self-discharge, sulfation, overcharge and corrosion due to simulate a charge-discharge cycle. Decompose sulfation began, improved electrode structure, the internal resistance of the battery is reduced, the threshold current increases, and electrolyte stratification decreases its density is aligned in banks. It occurs improved battery parameters
desulfation method 3: sparing - low currents at a constant voltage in standby, the cyclic pulsed charge - due to excess charging voltage decay and intensive - cyclic pulsed charge current asymmetric
charge the automotive battery.. similar charge CellPhones: Connect and taken when it is convenient - overcharging does not occur - at the end of the charge the device goes into the maintenance of the battery in a charged state, or translated into the buffer of safe long-term storage mode mode
The charge takes place under the control of the voltage at the terminals of the battery preventing damage. electrical car and the battery itself, which allows you to charge the battery without removing it from the car
I do not need an ammeter:. current as battery charge is maintained electronically unchanged and there is no need to add it. About the charging process will inform the multi-indicator "CHARGE».
The compact dimensions and weight of 550g 95h65h170mm. It provides their electrical characteristics when the line voltage is 150 to 240V.