Quantity
|
Out of stock
|
||
|
voltage regulator -2sh Volter ™ provides protection against changes in voltage in the range 130-270 volts. At the output of the device is provided in the stable component 220 with a tolerance of + 7.5% -10%. Such indicators allow to maintain the voltage at the facility within the State Standard of Ukraine.
The stabilizer has seven degrees of regulation. Step level is 20 volts. It should be borne in mind that an increase in the input voltage above 285V stabilizer is automatically disconnected from the network.
The small dimensions of the device make it possible to install it on the floor, cabinet, desk. Remember that the unit has IP-20 protection class, so you need to protect it from water and dust. The stabilizers Volter no forced cooling (fans), so that debris and excess hair will not be drawn into the unit
CHARACTERISTICS:.
range of input voltages, V: 130-270
Number of steps - 7
Maximum output power, kW: 2.2
output power at the lower value I / O voltage, kW: 1.3
Nominal O. voltage, 220
O deviation. % of the rated voltage: + 7.5 - 10
Cutout with increasing input voltage. B: 285
tripping current circuit breaker, A: 10
Dimensions, mm (height x width x depth): 340 x 310 x 120
Weight kg, not more than 10.5 < br />