Quantity
|
Out of stock
|
||
|
Heat pumps for heating, hot water and cooling using low-grade heat ambient air as the source
Models capacity of 5, 8, 11 and 15 kW
heat pump "air - water"
Mono heat pump outdoor performance
versatility: heating, hot water heating, cooling
allowable ambient air temperature - -20 ° C (-15 ° C to aroTHERM 55/2 a) for heating and 46 ° C for cooling mode.
With the help of the heat pump aroTHERM you can heat your home. In combination with a special heater for indirect heating of the heat pump (VIH RW 300) or DHW station (VPM ... / 2W) it can provide the most comfortable hot water. In addition, the function "active cold" allows you to use a heat pump to cool the room during the warmer months. Monoblock pump execution greatly simplifies installation and makes possible reliable installation. The heating circuit is connected to the outdoor unit heat pump- no need to install pipelines freon.
Features heat pumps aroTHERM monoblock
Monobloc heat pump outdoor performance. Ease of installation and reliability. No need for laying communication freon
Versatility: heating, hot water heating, cooling
maximum flow temperature 63 ° C
allowable ambient air temperature - -20 ° C for heating and 46 ° C for.. cooling mode.
high conversion coefficient (COP) due to durable modern compressor
Flexible power modulation and the absence of high inrush currents through inverter technology.
maximum use of renewable energy when operating in a system with other heating equipment.
management of the entire heating and air-conditioning systems from a single controller.
Possibility of remote monitoring and control from a mobile phone through a system comDIALOG
Low noise level.
Equipment heat pumps aroTHERM monoblock
inverter compressor pump frequency regulator
Integrated counter obtained energy environment
electronic expansion valve noise reduction function
heat pump is controlled via a regulator calorMATIC 470/4
modulating fan
Specifications aroTHERM 115/2 A 230/400
Thermal power (A7 / W35 acc. EN 14511) 10,5
kW Power Consumption, kW 2,6
conversion factor COP, 4,5
Heat output (A7 / W55 acc. EN 14511) 9.8 kW
power consumption, kW 3.5
conversion factor COP,
2.9 Thermal capacity (A35 / W18 acc. EN 14511)
10.6 kW power consumption, kW 3,3
conversion factor COP, 3,3
Heat output (A35 / W7 acc. EN 14511) 7,55
kW power consumption, kW coefficient 2,86
converting COP, 2.7
connection to the mains, V / 230 Hz (400) / 50
Maximum inrush current 20 A / 13,2
Max. Heating temperature, ° C 63
Minimum air temperature in the heating mode, ° C -20
maximum air temperature in the heating mode, ° C 28
Minimum air temperature in the cooling mode, ° C 10 < br /> Maximum in cooling air temperature, ° C 46
minimum coolant flow, liters / hr 540
Nominal coolant flow rate, l / h 1,900
noise (A7 / W35), dB 65
dimensions coolant circuit of compounds 1 inch 1/4 "
dimensions:
height (H),
975 mm Width 1103 mm depth
(D) mm Weight 463
(not filled), 126 kg