UPS Victron MultiPlus Compact 24/800/16-16 230V VE.Bus Inv./Char.

Victron MultiPlus - is a multifunctional device combining an inverter, a charger and an automatic power switch
Models available capacity of 800 VA to VA 5000, which may be combined: up to 6 devices may be connected in parallel, it is possible combination of three devices. work in three-phase mode.

The advantages of voltage inverters MULTI PLUS

The form of the output voltage - pure sine wave;
Function «Power Control» to limit power consumption;
Function «Power Assist "allows to increase the power by connecting the battery;
function« frequency shift »- frequency shift to use an excess of electricity;
parallel configuration to 6 for power augmentation devices;
three-phase configuration for three-phase networks 380/400/415 Volt;
time shift between the network and the battery is not more than 20 ms;
mode «U PS »to reduce the switching time 4-6 ms;
The power saving function is implemented in two modes;
The relay programmer can be configured to automatically start the generator;
inverter synchronization is available for control and configuration of complex schemes work;
board charger having four charge mode, the touch sensor input and select the optimum mode of the connected batteries

inverter specifications MultiPlus Compact:
Parallel and 3-phase. . configuration - Yes
PowerControl / PowerAssist - Yes / Yes
AC input voltage - 187-265 In AC, 45 - 65 Hz
transmission relay, A - 16

inverter characteristics:

voltage range DC, B - 19 - 33
Yield 230 AC- AC ± 50 Hz ± 2% 0.1%
AC power at 25 ° C ( IA) - (1) - 800
AC power at 25/40 ° C (W) - 700/650
Peak power (watts) - 1600
Max. Efficiency (%) - 92 Power
XX - (W) - 8
power XX - load search mode (W) - 5
power XX - mode "AES" load (W) - 5

charger Features:
AC input voltage - 187-265 In AC, 45 - 65 Hz, power factor: 1
Phase "absorption", in the DC - 28,8
Phase "float" - 27.6
phase support - 52.8
Maximum charge current, A - 16
charging current to the starter battery, A - 4 for 12 only and 24V models
Temperature sensor - standard
Key Features:
Programmable relay (2) Yes
not redundant output - is
Protection (3) A - G
VE.Bus communication port - For three-phase and parallel configurations, the remote monitoring system integration
port for Lithium Ion (BMS) - No
remote control on / off - Yes
General specifications - operating temperature range: -40 to +50 ° C (fan cooling) Humidity (non-condensing): 95%

The body < br /> Common specifications - Aluminum (blue Ral 5012) IP21
battery connection - The battery cable, 1.5m
230VAC compound - G-ST18i plug
Weight - 10
dimensions (HxWxL), mm - 375x214x110
Cm ndarty:
Compliance - EN60335-1, EN60335-2-29, EN55014-1 / EN 55014-2, EN63000-3-3

The limiter power consumption - PowerControl
limiter It operates when connected to the AC source (AC), controls the charging current of rechargeable batteries. Powerful charger, which is part of the inverter MultiPlus, implies an increased load in an electric network which employs a transducer, but thanks PowerControl function occurs load reduction by limiting the charging current, which can be important when working from a generator, port shore power and the like. D . Intelligent control allows consumers to consider and make use of "excessive" current in order to charge batteries



Increased capacity -. function PowerAssist
If the power is variable of the power supply is insufficient for a particular user or group of users at the time of peak demand, the MultiPlus inverter automatically connects to the battery pack, which leads to increase the capacity and smooth operation. This possibility is often at peak loads at the start of the work of "heavy" users. PowerAssist feature is available on all models of inverters, but requires certain settings.
At the time of load reduction, the excess current from the AC power supplied to the charger that recharges the batteries.
Charger

MultiPlus inverter comprises a power device for charging rechargeable batteries, which operates in four modes. This allows you to maximize efficient use of the battery, which greatly extends the service life. Also, the "on board» MultiPlus present dedicated sensor input for voltage measurement at the battery terminals (only for devices with power from 3000 to 5000 VA) and an input for a temperature sensor, which is supplied.